[OH:1][CH:2]([C:6]1[C:11]2[S:12][CH:13]=[CH:14][C:10]=2[C:9]([OH:15])=[CH:8][CH:7]=1)C([O-])=O.C([NH+](CCCC)CCCC)CCC.C(O)C.S(=O)(=O)(O)O.C(OC(C)C)(=O)C>S([O-])([O-])(=O)=O.[Fe+3].S([O-])([O-])(=O)=O.S([O-])([O-])(=O)=O.[Fe+3].O>[OH:15][C:9]1[C:10]2[CH:14]=[CH:13][S:12][C:11]=2[C:6]([CH:2]=[O:1])=[CH:7][CH:8]=1A 750 ml, 4-necked glass flask equipped with a mechanical stirrer, a thermometer, a dropping funnel and an argon inlet was charged under argon with 41.0 g (100 mmol) of tributylammonium hydroxy-(4-hydroxy-benzo[b]thiophen-7-yl)-acetate, 60.5 g (115 mmol) of iron(III) sulfate and a mixture prepared from 60 ml of dry ethanol and 300 ml of 0.4 N sulfuric acid aqueous solution. Then stirring was started and the reaction mixture was heated to 55-60° C. for 5 h. After cooling to room temperature, 300 ml of isopropyl acetate and 100 ml of water were added under stirring, then the organic phase was separated and transferred into a 500 ml glass flask equipped with a pH meter. After addition of 150 ml of water (pH was 3.0), ca. 58 ml of a 2 N sodium hydroxide aqueous solution were added dropwise at 20° C. until a pH of 12-12.5 was reached. The organic phase was removed and to the aqueous phase were added at 10-15° C. dropwise ca. 54 ml of a 2 N aqueous solution of sulfuric acid until a pH of 4-4.5 was reached. The product precipitated during the addition. The suspension was stirred over night at room temperature, 1.2 h in an ice bath and then filtered. The filter cake was washed with water and dried at 60° C./15 mbar to afford 17.23 g (94%) of 4-hydroxy-benzo[b]thiophene-7-carboxaldehyde as white crystals with m.p. of 204° C.