StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.2
  1. Startseite
  2. /Reaktion

Water → 5-ethoxycarbonylmethyl-3-methyl-1H-pyrrole-2,4-dicarboxylic acid 2-tert-butyl ester 4-ethyl ester

HRID 905705
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 905705
[CH2:1]([O:3][C:4](=[O:14])[CH2:5][C:6](=O)[CH2:7][C:8]([O:10][CH2:11][CH3:12])=[O:9])[CH3:2].[C:15]([O:19][C:20](=[O:27])[C:21](=[N:25]O)[C:22](=O)[CH3:23])([CH3:18])([CH3:17])[CH3:16].O>C(O)(=O)C.[Zn]>[CH2:1]([O:3][C:4]([C:5]1[C:22]([CH3:23])=[C:21]([C:20]([O:19][C:15]([CH3:18])([CH3:17])[CH3:16])=[O:27])[NH:25][C:6]=1[CH2:7][C:8]([O:10][CH2:11][CH3:12])=[O:9])=[O:14])[CH3:2]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 3

HCID 962WaterHCID 66045Diethyl acetonedicarboxylateHCID 178468384CID 71354250

Produkt 1

HCID 498403265-ethoxycarbonylmethyl-3-methyl-1H-pyrrole-2,4-dicarboxylic acid 2-tert-butyl ester 4-ethyl esterAusbeute 88,5 %

Reagenzien, Katalysatoren, Lösungsmittel 2

HCID 23994ZincKatalysator
HCID 176
Acetic Acid
Lösungsmittel

Reaktionsbedingungen

Temperatur
75 °C

Versuchsvorschrift

A stirred solution of 3-oxo-butyric acid tert-butyl ester (32 g, 0.2 mol) in glacial acetic acid was added dropwise with an aqueous solution of sodium nitrite (13.8 g, 0.2 mol sodium nitrite in 20 ml of water) while maintaining the temperature at 0˜5° C. Upon completion of the addition, the reaction mixture was stirred in an ice-water bath for 1 hour and at room temperature for another 3 hours. The solution of 2-hydroxyimino-3-oxo-butyric acid tert-butyl ester was obtained which was used as such. A mixture of 3-oxo-glutaric acid diethyl ester (40 g, 0.2 mol) in 90 ml of glacial acetic acid was added with the above solution of 2-hydroxyimino-3-oxo-butyric acid tert-butyl ester and zinc dust (26 g, 0.4 mol) alternatively at a rate to maintain the reaction temperature below 65° C. Upon completion of the addition, the mixture was stirred at 75° C. for 2 hours, added with cold water (100 ml), and the mixture was stirred at room temperature for 1 hour. The zinc dust was removed by filtration and the filtrate was extracted with ethyl acetate (100 ml×3). The combined organic extracts were washed with water (100 ml×3), saturated sodium bicarbonate solution (100 ml×4), and brine (100 ml), dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure to give 5-ethoxycarbonylmethyl-3-methyl-1H-pyrrole-2,4-dicarboxylic acid 2-tert-butyl ester 4-ethyl ester (60 g, 88.5%) as a yellow oil.

Aufarbeitung

  1. temperatureto maintain the reaction temperature below 65° C
  2. additionUpon completion of the addition
  3. stirringthe mixture was stirred at room temperature for 1 hour
  4. customThe zinc dust was removed by filtration
  5. extractionthe filtrate was extracted with ethyl acetate (100 ml×3)
  6. washThe combined organic extracts were washed with water (100 ml×3), saturated sodium bicarbonate solution (100 ml×4), and brine (100 ml)
  7. dry with materialdried over anhydrous sodium sulfate
  8. filtrationfiltered
  9. concentrationconcentrated under reduced pressure

Quellen und Nachweise

ORD-Eintrag
ord-6ed0e360d2b04216816327b0354a41bd
Quelldatensatz
uspto-grants-2011_09
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08012966B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion