HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Compound

Methyl vinyl ether

HCID 7861
New reaction
Print

Completing data — refresh the page later to see the latest

Basic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Substructure searchFind similar structures

Basic information

CAS
107-25-5
Standard SMILES
C=COC
InChIKey
XJRBAMWJDBPFIM-UHFFFAOYSA-N
Molecular formula
C3H6O
Average molar mass
58.08 g/mol
Monoisotopic mass
58.04186481

Overview

Vinyl methyl ether appears as a colorless gas with a sweet odor. Shipped as a liquefied gas under own vapor pressure. Contact with the liquid may cause frostbite. Easily ignited. Vapors are heavier than air. Leaks may either be liquid or vapor. May asphyxiate by the displacement of air. Under prolonged exposure to fire or intense heat containers may rupture violently and rocket.

Names & identifiers

Preferred name
Methyl vinyl ether
IUPAC
methoxyethene
English name
Methoxyethene
Molecular formula
C3H6O
Molecular weight
58.08

Names & synonyms

Methyl vinyl etherVINYL METHYL ETHER107-25-5MethoxyethyleneEther, methyl vinyl1-MethoxyethyleneAgrisynth MVEEther, ethenyl methylCCRIS 8972HSDB 1033EINECS 203-475-4UNII-G2OHX46576
Show more names
mveEthene,methoxy-Ethenylmethyletheragrisynthmveether,ethenylmethylCH2=CHOCH3
G2OHX46576EC 203-475-4RefChem:7791VINYL METHYL ETHER, STABILIZED203-475-4MethoxyetheneEthene, methoxy-Gantrez M

Database identifiers

CAS
107-25-5、9003-09-2
PubChem CID
7861
DTXSID
DTXSID4026761
UNII
G2OHX46576
EC Number
203-475-4
Nikkaji
J5.055E

Properties

Computed structural propertiesFilling in

XLogP
0.8
Topological polar surface area
9.2 Ų
Hydrogen bond donors
0
Hydrogen bond acceptors
1
Rotatable bonds
1
Heavy atoms
4
Formal charge
0
Complexity
17.2

Experimental & physicochemical properties

Chemical ClassesFlammable agents - 4th degree
PolymersPlastics & Rubber -> Other Monomers
SpringerMaterials PropertiesCoriolis coupling
OdorSweet, pleasant
Density · 2 items

0.777 at 32 °F (USCG, 1999) - Less dense than water; will float

0.7725 g/cu cm at 0 °C

Color/Form · 2 items

Colorless, compressed gas or colorless liquid

Colorless, liquified gas

Solubility · 5 items

In water, 0.97 wt% /15,000 mg/L/ at 20 °C

Slightly soluble in water

Very soluble in ethanol, ether, acetone, benzene

Soluble in organic solvents; insoluble in glycerol, glycol

Soluble in oxygenated solvents

Flash Point-69 °F (USCG, 1999)

Safety & regulation

Safety information is for reference only and does not replace the supplier’s Safety Data Sheet (SDS), applicable regulations, or professional assessment.

GHS classification

GHS Classification · 6 items

Danger

H220: Extremely flammable gas [Danger Flammable gases]

P203, P210, P222, P280, P377, P381, and P403 (click each P-code to see the statement)

Danger

H220 (100%): Extremely flammable gas [Danger Flammable gases]

P203, P210, P222, P280, P377, P381, P403, and P410+P403 (click each P-code to see the statement)

Hazard information

Regulatory Information · 6 items

Chemical: Ethene, methoxy-

Regulation (EC) No 258/1997

Ethene, methoxy- is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of Ethene, methoxy- are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: Methyl vinyl ether (EC: 203-475-4)

Ethene, methoxy-: Does not have an individual approval but may be used under an appropriate group standard

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

DOT LabelFlammable Gas
Fire Hazards · 2 items

Behavior in Fire: Containers may explode. Vapor is heavier than air and may travel a considerable distance to a source of ignition and flash back. (USCG, 1999)

· EXTREMELY FLAMMABLE.

Fire PotentialA very dangerous fire hazard when exposed to heat, flame, or oxidizers.
Health Hazards · 2 items

Inhalation causes intoxication, blurring of vision, headache, dizziness, excitation, loss of consciousness. Liquid or concentrated vapor irritates eyes and causes frostbite of skin. Aspiration of the liquid will cause chemical pneumonitis. (USCG, 1999)

Chemistry & industry

Pharmacology

Absorption, Distribution and ExcretionVinyl methyl ether is absorbed rapidly along the inhalation pathway.

Uses & manufacturing

Uses · 3 items

Used to make polymers or modify polymers for coatings, lacquers, and resins; [Hawley]

Painting (Pigments, Binders, and Biocides) [Category: Paint]

Copolymers used in coatings and lacquers; modifier for alkyl, polystyrene and ionomer resins; plasticizer for nitrocellulose and adhesives

U.S. Production · 4 items

2023: 25,000,000 - <75,000,000 lb

(1972) PROBABLY GREATER THAN 4.54X10+5 GRAMS

(1974) 4.5-6.8X10+9 G (VINYL ETHER CONSUMPTION)

Non-confidential 2016 Chemical Data Reporting (CDR) information on the production and use of chemicals manufactured or imported into the United States. Chemical: Methylvinylether:

Industry UsesIntermediate
Methods of Manufacturing · 3 items

Catalytic reaction of acetylene and methanol.

In a catalytic oxidation process developed by ICI for the production of methyl vinyl ether, ethylene is reacted with methanol in the presence of palladium chloride complexes or palladium metal. It is not known whether this process has been developed on an industrial scale.

Methanol + acetylene (ethynylation).

Formulations/PreparationsGrades: technical (95% min), pure. ... Commercial material contains a small proportion of polymerization inhibitor.
General Manufacturing Information · 2 items

All Other Basic Organic Chemical Manufacturing

Ethene, methoxy-: ACTIVE

Applications

Related reactions

20 records
New reaction record
HRID 65899 reaction equation
HRID 65899As reactant
HRID 106660 reaction equation
HRID 106660As reactant
HRID 129365 reaction equation
HRID 129365As reactant
HRID 190064 reaction equation
HRID 190064As reactant
HRID 223089 reaction equation
HRID 223089As productAs reactant
HRID 323832 reaction equation
HRID 323832As reactant
HRID 463362 reaction equation
HRID 463362As reactant
HRID 614013 reaction equation
HRID 614013As reactant
PreviousPage 1 of 3

Compound notes

On this pageBasic informationOverviewNames & identifiersPropertiesSafety & regulationChemistry & industryRelated reactionsCompound notes
Boiling Point · 2 items

41.9 °F at 760 mmHg (USCG, 1999)

6 °C

DecompositionWhen heated to decomposition it emits acrid smoke and irritating fumes.
Melting Point · 2 items

-188 °F (USCG, 1999)

-122 °C

Vapor Density2.0 (Air = 1)

Physicochemical properties

Melting point
-122 °C · -122°C
Boiling point
6 °C · 6°C
Density
0.744 · 0.7440
vapor pressure
169.17 kPa · 169.17kPa at 20℃
refractive index
1.3947 · 1.3947
Water Solubility
17.1 g/L · 17.1g/L at 25℃
Henry's Law Constant
1.5 · 1.5×10-3 mol/(m3Pa) at 25℃, HSDB (2015)
InChI
InChI=1S/C3H6O/c1-3-4-2/h3H,1H2,2H3
InChIKey
XJRBAMWJDBPFIM-UHFFFAOYSA-N
SMILES
C=COC
LogP
0.42 at · 0.42 at 25℃
CAS DataBase Reference
107 · 107-25-5(CAS DataBase Reference)
Indirect Additives used in Food Contact Substances
METHYL VINYL ETHER
FDA 21 CFR
175.105 · 175.105
EWG's Food Scores
1 · 1
FDA UNII
2 OHX46576 · G2OHX46576
NIST Chemistry Reference
Ethene, methoxy-(107-25-5)
EPA Substance Registry System
Vinyl methyl ether (107-25-5)
Symbol(GHS)
2 · GHS02,GHS04
Signal word
Danger
Hazard statements
220 · H220
Precautionary statements
210 · P210-P377-P381-P410+P403-P403
Hazard Codes
F+
Risk Statements
12 · 12
Safety Statements
9 · 9-16-33
RIDADR
1087 · UN 1087 (VINYL METHYL ETHER, STABILIZED)
TSCA
TSCA listed
HazardClass
2.1 · 2.1
Hazardous Substances Data
107 · 107-25-5(Hazardous Substances Data)
Toxicity
50 · rabbit,LD50,skin,> 8gm/kg (8000mg/kg),GAF Material Safety Data Sheet.
REACH Registrations
Active

· Vapors may cause dizziness or asphyxiation without warning, especially when in closed or confined areas.

Hazards SummaryInhalation can cause CNS depression. The liquid can cause frostbite. [CHRIS] Vinyl methyl ether, stabilized (UN1087) has warning of explosive polymerization; [ERG 2016] See Butyl vinyl ether.
DOT ID and Guide1087 116P
Reactive GroupEthers
Reactivity AlertsHighly Flammable
Reactivity Profile · 1 item

VINYL METHYL ETHER reacts vigorously with oxidizing materials. Explosive in the form of vapor when exposed to heat, flame or strong oxidizing agents. Reacts, possibly explosively with halogens (bromine, chlorine) or hydrogen halides (hydrogen bromide, hydrogen chloride) [Baker, 1980, p. 487]. On contact with dilute acids or even mildly acidic solids (calcium chloride, ceramics) undergoes rapid, exothermic homopolymerization, which cannot be prevented by antioxidants. Must be stored in the presence of base [MVE Brochure, Billingham, ICI, 1962].

Flammable LimitsLower: 2.6% by volume, Upper: 39% by volume
DOT Emergency Guidelines · 5 items

/GUIDE 116P GASES - FLAMMABLE (Unstable)/ Fire or Explosion: EXTREMELY FLAMMABLE. Will be easily ignited by heat, sparks or flames. Will form explosive mixtures with air. Silane (UN2203) will ignite spontaneously in air. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Vapors from liquefied gas are initially heavier than air and spread along ground. Vapors may travel to source of ignition and flash back. Cylinders exposed to fire may vent and release flammable gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket. /Vinyl methyl ether, stabilized/

/GUIDE 116P GASES - FLAMMABLE (Unstable)/ Health: Vapors may cause dizziness or asphyxiation without warning. Some may be toxic if inhaled at high concentrations. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire may produce irritating and/or toxic gases. /Vinyl methyl ether, stabilized/

/GUIDE 116P GASES - FLAMMABLE (Unstable)/ Public Safety: CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number listed on the inside back cover. As an immediate precautionary measure, isolate spill or leak area for at least 100 meters (330 feet) in all directions. Keep unauthorized personnel away. Stay upwind, uphill and/or upstream. Many gases are heavier than air and will spread along ground and collect in low or confined areas (sewers, basements, tanks). /Vinyl methyl ether, stabilized/

/GUIDE 116P GASES - FLAMMABLE (Unstable)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing will only provide limited protection. /Vinyl methyl ether, stabilized/

For more DOT Emergency Guidelines (Complete) data for Vinyl methyl ether (8 total), please visit the HSDB record page.

Safety & protection

Fire FightingExcerpt from ERG Guide 116 [Gases - Flammable (Unstable); polymerization hazard]:
Accidental Release Measures · 2 items

· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.

· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.

First Aid · 2 items

INHALATION: remove victim to fresh air; if breathing is difficult, administer oxygen; call physician.

General First Aid:

Exposure Control and Personal Protection · 2 items

· Wear positive pressure self-contained breathing apparatus (SCBA).

200.0 [ppm]

Fire Fighting ProceduresTo fight fire, stop flow of gas.
Nonfire Spill ResponseExcerpt from ERG Guide 116 [Gases - Flammable (Unstable); polymerization hazard]:
Disposal Methods · 2 items

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

This compound should be susceptible to removal from waste water by air stripping. /Bis(2-chloroethyl)ether/

Isolation and Evacuation · 2 items

Excerpt from ERG Guide 116 [Gases - Flammable (Unstable); polymerization hazard]:

Immediate precautionary measure

Personal Protective Equipment (PPE)Organic-vapor mask; plastic or rubber gloves; safety glasses (USCG, 1999)
Emergency Response Planning Guidelines· DO NOT EXTINGUISH A LEAKING GAS FIRE UNLESS LEAK CAN BE STOPPED.

Toxicology

Environmental Fate · 3 items

TERRESTRIAL FATE: Based on a classification scheme(1), an estimated Koc value of 5(SRC), determined from a structure estimation method(2), indicates that vinyl methyl ether is expected to have very high mobility in soil(SRC). Volatilization of vinyl methyl ether from moist soil surfaces is expected(SRC) given an estimated Henry's Law constant of 3.9X10-3 atm-cu m/mole(SRC) based upon its vapor pressure, 1316 mm Hg(3), and water solubility, 15,000 mg/L(4). Vinyl methyl ether is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(3). Biodegradation data in soil were not available(SRC, 2018).

AQUATIC FATE: Based on a classification scheme(1), an estimated Koc value of 5(SRC), determined from a structure estimation method(2), indicates that vinyl methyl ether is not expected to adsorb to suspended solids and sediment(SRC). Volatilization from water surfaces is expected(3) based upon an estimated Henry's Law constant of 3.9X10-3 atm-cu m/mole(SRC) derived from its vapor pressure, 1316 mm Hg(4), and water solubility, 15,000 mg/L(5). Using this Henry's Law constant and an estimation method(3), volatilization half-lives for a model river and model lake are 2 hours and 3 days, respectively(SRC). Vinyl methyl ether is expected to undergo hydrolysis in the environment based on hydrolysis half-lives of 9.5 hours, 40 days and 10.9 years at pH 5, 6 and 9, respectively, in structurally similar butyl vinyl ether(6). According to a classification scheme(7), an estimated BCF of 3(SRC), from an estimated log Kow of 0.42(2) and a regression-derived equation(2), suggests the potential for bioconcentration in aquatic organisms is low. Biodegradation data in water were not available(SRC, 2018).

ATMOSPHERIC FATE: According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), vinyl methyl ether, which has a vapor pressure of 1316 mm Hg at 25 °C(2), is expected to exist solely as a gas in the ambient atmosphere. Gas-phase vinyl methyl ether is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone(SRC); the half-lives for these reactions in air are estimated to be 11 hours and 1.3 days(SRC), calculated from its respective rate constants of 3.35X10-11(3) and 8.8X10-16(4) cu cm/molecule-sec. Vinyl methyl ether does not absorb at wavelengths >290 nm(5) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC).

Adverse EffectsNeurotoxin - Other CNS neurotoxin
Toxicity Summary · 1 item

IDENTIFICATION AND USE: Vinyl methyl ether is a colorless compressed gas or colorless liquid. Copolymers are used in coatings and lacquers, as a modifier for alkyl, polystyrene and ionomer resins, and as a plasticizer for nitrocellulose and adhesives. HUMAN STUDIES: There are no data available. ANIMAL STUDIES: Vinyl methyl ether does not produce inflammatory changes in either the skin or eyes of rabbits. Rats tolerate repeated inhalation of 2000 ppm. In two 28-day inhalation studies in rats restlessness, reduction in body weight gain and an increase in relative weight of the liver were observed at 25,000 ppm. In the male rats, an increase in prothrombin time and a reduction in total protein occured at higher concentrations. In the 28-day inhalation study, 1500 ppm was the no effect level for male rats and 3500 ppm for female rats. Methyl vinyl ether was not mutagenic on Salmonella typhimurium TA98, TA100, TA1535 and TA1537, and Escherichia` coli WP2 uvrA with or without metabolic activation. In the micronucleus test in mice, vinyl methyl ether did not produce a clastogenic effect following 5 exposures of 25,000 ppm.

Soil Adsorption/Mobility · 1 item

Using a structure estimation method based on molecular connectivity indices(1), the Koc of vinyl methyl ether can be estimated to be 5(SRC). According to a classification scheme(2), this estimated Koc value suggests that vinyl methyl ether is expected to have very high mobility in soil.

Artificial Pollution Sources · 1 item

Vinyl methyl ether's production and use in copolymers for coatings and lacquers, in polystyrene and ionomer resins, in plasticizers for nitrocellulose, and in adhesives(1) may result in its release to the environment through various waste streams(SRC).

Environmental Bioconcentration · 1 item

An estimated BCF of 3 was calculated in fish for vinyl methyl ether(SRC), using an estimated log Kow of 0.42(1) and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low.

Volatilization from Water/Soil · 1 item

The Henry's Law constant for vinyl methyl ether is estimated as 3.9X10-3 atm-cu m/mole(SRC) derived from its vapor pressure, 1316 mm Hg(1), and water solubility, 15,000 mg/L(2). This Henry's Law constant indicates that vinyl methyl ether is expected to volatilize from water surfaces(3). Based on this Henry's Law constant, the volatilization half-life from a model river (1 m deep, flowing 1 m/sec, wind velocity of 3 m/sec)(3) is estimated as 2 hours(SRC). The volatilization half-life from a model lake (1 m deep, flowing 0.05 m/sec, wind velocity of 0.5 m/sec)(3) is estimated as 3 days(SRC). Vinyl methyl ether's estimated Henry's Law constant indicates that volatilization from moist soil surfaces may occur(SRC). Vinyl methyl ether is expected to volatilize from dry soil surfaces(SRC) based upon its vapor pressure(1).

Non-Human Toxicity Excerpts · 5 items

/LABORATORY ANIMALS: Acute Exposure/ Rats tolerate repeated inhalation of 2000 ppm (4.7 mg/L, 15 times 6 hours) without any symptoms and findings.

/LABORATORY ANIMALS: Acute Exposure/ According to earlier studies, vinyl methyl ether does not produce inflammatory changes in either the skin or eyes of rabbits.

/LABORATORY ANIMALS: Subchronic or Prechronic Exposure/ In two 28-day inhalation studies with concentrations of 0, 500, 3500 and 25,000 ppm and 0,150, 500 and 1500 ppm (0, 1.19, 8.3 and 59.3 mg/L and 0, 0.36, 1.2 and 3.6 mg/L), restlessness, reduction in body weight gain and an increase in relative weight of the liver are observed at 25,000 ppm (59.3 mg/L). In the male rats, an increase in prothrombin time and a reduction in total protein occurs at higher concentrations. ... Following inhalation of 25,000 ppm (59.3 mg/L), atrophy in the region of the olfactory epithelium is observed on histological examination of the nasal mucosae. No other histopathological changes are observed. In the 28-day inhalation study, 1500 ppm (3.6 mg/L) is given as the no effect level for male rats and 3500 ppm (8.3 mg/L) for female rats.

/GENOTOXICITY/ ... Mutagenicity tests of 14 compounds and 1,3-butadiene on S. typhimurium TA98, TA100, TA1535 and TA1537, and E. coli WP2 uvrA were also examined by the developed gas exposure method. 1,3-Butadiene, propyne (methyl acetylene), monochlorodifluoromethane, ethylchloride, diborane and silane were mutagenic. 1-Butene, 2-butene, 2-methylpropene, methyl vinyl ether, trichlorofluoromethane, dichlorodifluoromethane, 1,2-dichloro-1,1,2,2-tetrafluoroethane, 1,1-difluoroethane and phosphine were not mutagenic on S. typhimurium TA98, TA100, TA1535 and TA1537, and E. coli WP2 uvrA with or without metabolic activation. These results were compatible with a previous report, and this developed method has the advantage that it can be tested easily and safely for combustible and self-combustible substances such as 1,3-butadiene and silane.

/GENOTOXICITY/ In the micronucleus test in mice, vinyl methyl ether did not produce a clastogenic effect following inhalation of 25,000 ppm (59.3 mg/L) 5 times.

Environmental Abiotic Degradation · 1 item

The rate constant for the vapor-phase reaction of vinyl methyl ether with photochemically-produced hydroxyl radicals has been reported as 3.35X10-11 cu cm/molecule-sec at 25 °C(1). This corresponds to an atmospheric half-life of about 11 hours at an atmospheric concentration of 5X10+5 hydroxyl radicals per cu cm(1). The rate constant for the vapor-phase reaction of vinyl methyl ether with ozone has been estimated as 8.7X10-16 cu cm/molecule-sec at 25 °C(SRC) that was derived using a structure estimation method(2). This corresponds to an atmospheric half-life of about 1.3 days at an atmospheric concentration of 7X10+11 ozone molecules per cu cm(3). Vinyl methyl ether may undergo hydrolysis in the environment based on hydrolysis half-lives of 9.5 hours, 40 days and 10.9 years at pH 5, 7 and 9, respectively, for structurally similar butyl vinyl ether(4). Vinyl methyl ether does not absorb at wavelengths >290 nm(5) and, therefore, is not expected to be susceptible to direct photolysis by sunlight(SRC).

Probable Routes of Human Exposure · 2 items

According to the 2016 TSCA Inventory Update Reporting data, 2 reporting facilities estimate the number of persons reasonably likely to be exposed in the manufacturing, processing, or use of vinyl methyl ether in the United States may be as low as 25-49 workers up to the range of 100-499 workers per plant; the data may be greatly underestimated due to confidential business information (CBI) or unknown values(1).

NIOSH (NOHS Survey 1972-1974) has statistically estimated that 23,702 workers are exposed to vinyl methyl ether in the USA(1).

Environmental Fate/Exposure Summary · 1 item

Vinyl methyl ether's production and use in copolymers for coatings and lacquers, in polystyrene and ionomer resins, in plasticizers for nitrocellulose, and in adhesives may result in its release to the environment through various waste streams. If released to air, a vapor pressure of 1316 mm Hg at 25 °C indicates vinyl methyl ether will exist solely as a gas in the atmosphere. Gas-phase vinyl methyl ether will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals and ozone; the half-lives for these reactions in air are estimated to be 11 hours and 1.3 days, respectively. Vinyl methyl ether does not absorb at wavelengths >290 nm and, therefore, is not expected to be susceptible to direct photolysis by sunlight. If released to soil, vinyl methyl ether is expected to have very high mobility based upon an estimated Koc of 5. Volatilization from moist soil surfaces is expected based upon an estimated Henry's Law constant of 3.9X10-3 atm-cu m/mole. Vinyl methyl ether is expected to volatilize from dry soil surfaces based upon its vapor pressure. Biodegradation data in soil or water were not available. If released into water, vinyl methyl ether is not expected to adsorb to suspended solids and sediment based upon the estimated Koc. Volatilization from water surfaces is expected to be an important fate process based upon this compound's estimated Henry's Law constant. Estimated volatilization half-lives for a model river and model lake are 2 hours and 3 days, respectively. An estimated BCF of 3 suggests the potential for bioconcentration in aquatic organisms is low. Hydrolysis is expected based on hydrolysis half-lives of 9.5 hours, 40 days and 10.9 years at pH 5, 6 and 9, respectively, for structurally similar butyl vinyl ether. Occupational exposure to vinyl methyl ether may occur through inhalation and dermal contact with this compound at workplaces where vinyl methyl ether is produced or used. (SRC)

Antidote and Emergency Treatment · 3 items

Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Ethers and related compounds/

Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Provide a low-stimulus environment. Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Treat frostbite by rapid rewarming ... . /Ethers and related compounds/

Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious or is in severe respiratory distress. Monitor cardiac rhythm and treat arrhythmias if necessary ... . Start IV administration of D5W /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Consider vasopressors if patient is hypotensive with a normal fluid volume. Watch for signs of fluid overload ... . Treat seizures with diazepam (Valium) or lorazepam (Ativan) ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Ethers and related compounds/

Regulatory information

DHS Chemicals of Interest (COI) · 4 items

Vinyl methyl ether

1

10000

Flammable chemical that can be released at a facility.

Safety data

tsca
TSCA listed
ridadr
UN 1087 (VINYL METHYL ETHER, STABILIZED)
Toxicity
rabbit,LD50,skin,> 8gm/kg (8000mg/kg),GAF Material Safety Data Sheet.
risk_code
12
Signal word
Danger
Symbol(GHS)
GHS02,GHS04
hazard_code
F+
safety_code
9-16-33
hazard_class
2.1
Hazard statements
H220
REACH Registrations
Active
Precautionary statements
P210-P377-P381-P410+P403-P403
Hazardous Substances Data
107-25-5(Hazardous Substances Data)
· 4 items

DescriptionMethoxyethene (MVE) is a colorless and flammable gas with a sweet and pleasant odor at room temperature. It is heavier than air and can diffuse to a relatively distant place at a lower place. MVE is soluble in ethanol, ether and acetone, but it is only slightly soluble in water. MVE is easily polymerized, so potassium hydroxide is often added as a polymerization inhibitor in the finished product.

UsesMethyl Vinyl Ether is a reagent in the preparation of sodium alginate interpolymer complexes, pH-tunable drug carries.

UsesCopolymers used in coatings and lacquers; modifier for alkyl, polystyrene, and ionomer resins; plasticizer for nitrocellulose and adhesives.

General DescriptionA colorless gas with a sweet odor. Shipped as a liquefied gas under own vapor pressure. Contact with the liquid may cause frostbite. Easily ignited. Vapors are heavier than air. Leaks may either be liquid or vapor. May asphyxiate by the displacement of air. Under prolonged exposure to fire or intense heat containers may rupture violently and rocket.

Upstream & downstream products

Upstream raw materials

2-METHOXYETHYL ISOTHIOCYANATEbicyclo[1.1.1]pentaneTricyclo[1.1.1.01,3]pentaneCYCLOPENTADIENYLIRON DICARBONYL DIMER4,4'-DI-TERT-BUTYLDIPHENYLMETHANE1,1-DIBROMO-2,2-BIS(CHLOROMETHYL)CYCLOPROPANEMethanol

Downstream products

2-Undecenal4-BROMO-PYRAN-2-ONEFENPICLONIL1,1,3-TRIMETHOXYBUTANEStannane, tributyl(1-methoxyethenyl)-