HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Diisopropylamine → 6-Ethynyl-1,1,4,4-tetramethyl-1,2,3,4-tetrahydronaphthalene

HRID 128917
Print

Reaction equation

HRID 128917 reaction equation
C(NC(C)C)(C)C.C([Li])CCC.[CH3:13][C:14]1([CH3:29])[C:23]2[C:18](=[CH:19][C:20]([C:24](=O)[CH3:25])=[CH:21][CH:22]=2)[C:17]([CH3:28])([CH3:27])[CH2:16][CH2:15]1.P(Cl)(OCC)(OCC)=O.C([N-]C(C)C)(C)C.[Li+]>O1CCCC1.CCCCCC>[CH3:13][C:14]1([CH3:29])[C:23]2[C:18](=[CH:19][C:20]([C:24]#[CH:25])=[CH:21][CH:22]=2)[C:17]([CH3:28])([CH3:27])[CH2:16][CH2:15]1
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

8

Reactant 5

HCID 7912Diisopropylamine2×HCID 13139Diethyl chlorophosphateHCID 2724682Lithium diisopropylamideHCID 27475621-(5,5,8,8-Tetramethyl-5,6,7,8-tetrahydronaphthalen-2-yl)ethan-1-oneHCID 178418339Butyllithium2×

Product 1

HCID 14726549
6-Ethynyl-1,1,4,4-tetramethyl-1,2,3,4-tetrahydronaphthalene

Reagents, catalysts & solvents 2

HCID 8028TetrahydrofuranSolvent3×HCID 8058HexaneSolvent

Conditions

Temperature
-78 °C

Procedure

To a stirred solution of 1.1572 g (11.4359 mmol) of diisopropylamine in 20 ml of dry tetrahydrofuran under argon at -78° C. was added dropwise via syringe, 7.2 ml of 1.6M (11.52 mmol) n-butyllithium in hexane. This mixture was stirred at -78° C. for 1 hour and then treated dropwise with a solution of 2.635 g (11.4391 mmol) of 1,1,4,4-tetramethyl-1,2,3,4-tetrahydro-6-acetylnaphthalene in 6 ml of dry tetrahydrofuran. After stirring at -78° C. for 1 hour, the mixture was treated with 1.97 g (11.4175 mmol) of diethyl chlorophosphate. The cooling bath was then removed and the mixture stirred at room temperature for 3.5 hours. This mixture was then transferred using a double ended needle to a solution of lithium diisopropylamide [prepared using 2.31 g (22.83 22 mmol) of diisopropylamine and 14.5 ml of 1.6M (23.2 mmol) n-butyllithium in hexane] in 60 ml of dry tetrahydrofuran at -78° C. Stirring was commenced at room temperature and continued for 20 hours. The reaction was then quenched with 50 ml water and acidified with 25 ml of 3N hydrogen chloride. Reaction product was recovered by extracting with 5×50 ml pentane. Organic extracts were combined and washed with 3N hydrogen chloride, water, saturated NaHCO3 and saturated NaCl solutions and then dried (MgSO4). Solvent was then removed and residue purified by flash chromatography (silica, 5% ethylacetate in hexane) followed by kugelrohr distillation (60° C., 0.2 mm) to give the title compound as a colorless oil. PMR (CDCl3): δ1.25 (6H, s), 1.27(6H, S), 1.66 (4H, s), 2.98 (1H, S, 7.24 (2H, s), 7.46 (1H, s).

Workup

  1. stirringAfter stirring at -78° C. for 1 hour
  2. customThe cooling bath was then removed
  3. stirringthe mixture stirred at room temperature for 3.5 hours
  4. customat -78° C
  5. stirringStirring
  6. customwas commenced at room temperature
  7. waitcontinued for 20 hours
  8. customThe reaction was then quenched with 50 ml water
  9. customReaction product
  10. customwas recovered
  11. extractionby extracting with 5×50 ml pentane
  12. washwashed with 3N hydrogen chloride, water, saturated NaHCO3 and saturated NaCl solutions
  13. dry with materialdried (MgSO4)
  14. customSolvent was then removed
  15. customresidue purified by flash chromatography (silica, 5% ethylacetate in hexane)
  16. distillationfollowed by kugelrohr distillation (60° C., 0.2 mm)

Sources & evidence

ORD record
ord-4a3046a3faff4e1180cfa37b5a1573a3
Source dataset
uspto-grants-1995_11
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US05466690

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes