[H-].[Na+].[Cl:3][C:4]1[N:14]=[C:13]2[C:7]([N:8]([CH3:16])[C:9](=[O:15])[CH2:10][CH2:11][NH:12]2)=[CH:6][N:5]=1.[CH2:17](Br)[C:18]1[CH:23]=[CH:22][CH:21]=[CH:20][CH:19]=1.[Cl-].[NH4+]>CC(N(C)C)=O.CO>[CH2:17]([N:12]1[CH2:11][CH2:10][C:9](=[O:15])[N:8]([CH3:16])[C:7]2[C:13]1=[N:14][C:4]([Cl:3])=[N:5][CH:6]=2)[C:18]1[CH:23]=[CH:22][CH:21]=[CH:20][CH:19]=1To a cooled (ice/water bath) suspension of sodium hydride (60% dispersion in mineral oil; 6.5 mg, 0.16 mmol) in DMA (0.5 mL) was added a solution of 10-chloro-6-methyl-2,6,9,11-tetrazabicyclo[5.4.0]undeca-7,9,11-trien-5-one (Intermediate 100; 32 mg, 0.15 mmol) in DMA (1.0 mL). The reaction mixture was allowed to stir, under nitrogen, in an ice bath for 15 minutes prior to addition of Benzyl bromide (Aldrich; 20 μl, 0.17 mmol). The reaction mixture was stirred on an ice bath for 15 minutes and then at ambient temperature for 3 hrs A further addition of Sodium hydride (2 mg) was made and stirring continued for 6 hrs. Saturated ammonium chloride (0.5 ml) was added and the reaction mixture poured directly onto an SCX-3 cartridge (2 g). The cartridge was washed with methanol (˜30 mL) before eluting products with 2M ammonia in methanol (˜30 mL). Product containing fractions were evaporated to dryness to give a colourless gum, which was combined with the cartridge methanol pre-wash and this solution evaporated to dryness. The resultant material was partitioned between DCM (10 mL) and water (10 mL). The organic phase was collected by gravity elution through a PTFE filter cup and evaporated to give the title compound as a pale yellow opaque gum (46 mg, 89%)
Loading…
