C[Si](C)(C)Cl.[CH:6](=[O:13])[C:7]1[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=1.Br[CH2:15][C:16]([O:18][CH3:19])=[O:17].Cl>C(OC(C)C)(=O)C.[Zn]>[OH:13][CH:6]([C:7]1[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=1)[CH2:15][C:16]([O:18][CH3:19])=[O:17]At room temperature, a three-necked flask fitted with reflux condenser, internal thermometer, dropping funnel and stirrer was charged, under nitrogen protective gas, with 5.7 g of zinc powder (87 mmol) in 35 ml of isopropyl acetate. After 1.65 ml of trimethylchlorosilane (13 mmol) had been added, the mixture was heated at 65° C. for 30 min. Following cooling to 60° C., 6.2 g of benzaldehyde (58 mmol) were added and, over the course of 4 min, 10.6 g of methyl bromoacetate (70 mmol) were added dropwise at 55° C., the temperature being maintained at 55° C. by external cooling. The mixture was then stirred at 55° C. for 5 min and, after cooling to 0° C., acidified with 40 ml of 2 N hydrochloric acid to a pH of 1 and stirred for 30 min. Excess zinc was removed by filtration and the organic phase separated. The organic phase was then stirred at 0° C. with 40 ml of 0.5 N hydrochloric acid and finally washed with 20 ml of saturated sodium hydrogen carbonate solution. Following phase separation and drying over sodium sulfate, the solvent was distilled off under reduced pressure. Methyl 3-hydroxy-3-phenylpropionate was obtained in a yield of 8.9 g (85% of theory) with a boiling point of 76° C. (0.07 mbar).