ホームMCPワークベンチSkills
ホームワークベンチ通知マイページ
llms.txt · MCPガイドプライバシーポリシー · 利用規約 · サポートv1.8.3
  1. ホーム
  2. /化合物

メチルエチルケトン過酸化物

Methyl ethyl ketone peroxide

HCID 3672772
反応を作成
印刷
基本情報概要名称と識別子物性安全と法規制化学と産業関連反応化合物ノート
部分構造検索類似構造を探す

基本情報

CAS
126-76-1
標準SMILES
CCC(C)(OO)OOC(C)(CC)OO
InChIKey
WFUGQJXVXHBTEM-UHFFFAOYSA-N
分子式
C8H18O6
平均分子量
210.22 g/mol
単同位体質量
210.11033829

概要

Methyl ethyl ketone peroxide is a colorless liquid. Strong irritant to skin and tissue. Used as an initiator for room temperature cure of unsaturated polyester resins.

名称と識別子

優先名称
Methyl ethyl ketone peroxide
IUPAC
2-hydroperoxy-2-(2-hydroperoxybutan-2-ylperoxy)butane
現地名
メチルエチルケトン過酸化物
英語名
2-Butanone peroxide
分子式
C8H18O6
分子量
210.22

名称と別名

2-BUTANONE PEROXIDE1338-23-4Methyl ethyl ketone peroxideThermacureKetonoxMepoxEsperfoam FRLupersol DELButanox LPTQuickset superMEKPQuickset Extra
名称をさらに表示
メチルエチルケトンペルオキシドメチルエチルケトン過酸化物エチルメチルケトンパ-オキサイドメチルエチルケトンパーオキサイドメチルエチルケトン酸化物メチルエチルケトンペルオキシド (約50%フタル酸ジメチル溶液)エチルメチルケトンペルオキシド2-ブタノンペルオキシドLUPEROX® DDM-9, 2-ブタノン ペルオキシド 溶液LUPEROX® DHD-9, 2-ブタノン ペルオキシド 溶液mekpoTrigonox V328fr222permekgpermeknkayameka
2-Butanone, peroxideLucidol delta XMEK peroxideKayamek AKayamek MLupersol DDMLupersol DNFLupersol DSW

データベース識別子

CAS
126-76-1、1338-23-4
PubChem CID
3672772
DTXSID
DTXSID1024671
ChEMBL
CHEMBL1562553

物性

構造計算による物性

XLogP
1.3
極性表面積
77.4 Ų
水素結合供与体数
2
水素結合受容体数
6
回転可能結合数
7
重原子数
14
形式電荷
0
複雑度
146

実験および物理化学的性質

Chemical Classes · 2 件

Other Classes -> Peroxides, Organic

Flammable agents - 2nd degree

Odor · 2 件

Typical odor-resembles that of acetone.

Fragrant, mint-like, moderately sharp odor

Density · 4 件

1.17 at 68 °F (USCG, 1999) - Denser than water; will sink

Relative density (water = 1): 1.10-1.17

1.12

(59 °F): 1.12

Color/Form · 2 件

Colorless liquid

Colorless liquid [Note: Explosive decomposition occurs at 230 degrees F].

Solubility · 4 件

1 to 5 mg/mL at 72 °F (NTP, 1992)

Partially miscible in water; completely miscible with most organic solvents

Solubility in water: very poor

Soluble

Flash Point · 4 件

180 °F (NTP, 1992)

180 °F

125-200 °F for 60% MEKP (open cup)

(oc) 125-200 °F (60% MEKP)

Boiling Point · 5 件

244 °F at 760 mmHg (Decomposes) (NIOSH, 2024)

19 °C

244 °F (decomposes)

19 °C @760 [mm Hg]

244 °F (Decomposes)

安全と法規制

安全情報は参考情報です。供給元の安全データシート(SDS)、適用法令、専門家による評価に代わるものではありません。

GHS分類

GHS Classification · 6 件

This chemical does not meet GHS hazard criteria for 7.4% (26 of 349) of reports.

Danger

H242 (90%): Heating may cause a fire [Danger Self-reactive substances and mixtures; Organic peroxides]

P210, P234, P235, P240, P260, P261, P264, P264+P265, P270, P271, P280, P301+P317, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P317, P319, P321, P330, P363, P370+P378, P403, P403+P233, P405, P410, P411, P420, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 349 reports by companies from 12 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Danger

危険有害性情報

Regulatory Information · 6 件

Chemical: 2-Butanone, peroxide

2-Butanone, peroxide is listed on the EPA's Chemical Data Reporting (CDR) system. Manufacturers and importers of 2-Butanone, peroxide are required to report information about their production and use of this chemical to the EPA under the Toxic Substances Control Act (TSCA). (40 eCFR Part 711)

REACH registered substance: 2-Butanone, peroxide (EC: 215-661-2)

REACH registered substance: Reaction mass of butane-2,2-diyl dihydroperoxide and di-sec-butylhexaoxidane (EC: 700-954-4)

2-Butanone, peroxide 33-40% in dimethyl phthalate + 1-10% methyl ethyl ketone: HSNO Approval: HSR001376 Approved with controls

The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)

Other Safety InformationIMAP assessments - Selected organic hydroperoxides: Human health tier II assessment
DOT LabelOrganic Peroxide
Fire Hazards · 2 件

Behavior in Fire: Explosive. (USCG, 1999)

化学と産業

薬理情報

Metabolism/Metabolites · 1 件

The stability of glutathione peroxidase was assessed in vivo via oxidative inactivation by methyl ethyl ketone peroxide. The stability of glutathione peroxidase was compared to other enzymes. Some of the enzymes tested were very stable to methyl ethyl ketone peroxide. Glutathione peroxidase in the absence of glutathione was relatively slowly inactivated. Thus, glutathione peroxidase appears to be a relatively stable enzyme & is well suited to perform its role in peroxide detoxification & prevention of oxidative deterioration of cells.

用途と製造

Uses · 6 件

Used as a curing agent in the production of plastics, adhesives, lacquers, and fiberglass; [HSDB]

Painting (Pigments, Binders, and Biocides) [Category: Paint]

Sculpturing plastics [Category: Hobbies]

Manufacture of acrylic resins; hardening agent for fiberglass-reinforced plastics.

MEDICATION

Unsaturated polyester resin crosslinking agent

U.S. Imports(1977) AT LEAST 4.54X10+5 G
U.S. Production · 6 件

2023: 10,000,000 - <50,000,000 lb

(1978) 4.09X10+8 G

(1982) 2.68X10+9 G

(1985) 4.43X10+8 g.

(1992) 4,520,000 kg

(1993) 5,107,000 kg

Consumption PatternsCURING AGENT FOR UNSATURATED POLYESTER RESINS, 94%; OTHER USES, 6% (1980).
Consumer UsesHardener
Industry UsesCBI
Methods of ManufacturingReaction of methyl ethyl ketone with hydrogen peroxide (peroxidation)
Formulations/Preparations

関連反応

4 件
反応記録を作成
HRID 380062 の反応式
HRID 380062反応物として
HRID 616072 の反応式
HRID 616072反応物として
HRID 1601477 の反応式
HRID 1601477反応物として
HRID 1858054 の反応式
HRID 1858054反応物として

化合物ノート

このページの内容基本情報概要名称と識別子物性安全と法規制化学と産業関連反応化合物ノート
UNII
W2545087UL
EC Number
215-661-2、700-954-4
Nikkaji
J184.351F
Decomposition
>80 °C
Vapor DensityComponent 2 (83.33%: LACTOSE): 6.69 (NTP, 1992) (Relative to Air)
Vapor Pressureless than 0.01 mmHg at 68 °F Component 2 (83.33%: LACTOSE) (NTP, 1992)
Food Contact SubstancesFCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR
Physical Description · 6 件

Methyl ethyl ketone peroxide is a colorless liquid. Strong irritant to skin and tissue. Used as an initiator for room temperature cure of unsaturated polyester resins.

Liquid; CBI

Colorless liquid with a characteristic odor. [Note: Explosive decomposition occurs at 230 degrees F.]; [NIOSH]

COLOURLESS LIQUID WITH PUNGENT ODOUR.

Colorless liquid with a characteristic odor.

Colorless liquid with a characteristic odor. [Note: Explosive decomposition occurs at 230 °F.]

物理化学的性質

融点
110 °C · 110°C
沸点
80 °C · Decomposition beyond 80 °C (176 °F)
比重(密度)
1.17 g · 1.170 g cm−3
蒸気圧
0.644 · 0.644-73.6Pa at 25℃
屈折率
20 · n 20/D 1.437
闪点
75 °C · 75 °C (167 °F; 348 K)
貯蔵温度
2 · 2-8°C
外見
liquid
色
Colorless
水溶解度
22 ℃で0.1~0.5g/100mL · 22℃で0.1~0.5g/100mL
BRN
1759757 · 1759757
安定性
加熱すると激しい反応や爆発を起こすことがある。可燃物や有機物と激しく反応する。可燃物、強力な酸化剤、強力な還元剤、コバルト化合物、真鍮、軟鋼、アルミニウム合金、天然および合成ゴム、化学促進剤、重金属、酸、塩基などの促進剤とは相容れない。
InChI
1S/C8H18O6/c1-5-7(3,11-9)13-14-8(4,6-2)12-10/h9-10H,5-6H2,1-4H3
InChIKey
WFUGQJXVXHBTEM-UHFFFAOYSA-N
SMILES
CCC(C)(OO)OOC(C)(CC)OO
LogP
0.3 at · 0.3 at 25℃
CAS データベース
1338 · 1338-23-4(CAS DataBase Reference)
EPAの化学物質情報
Methyl ethyl ketone peroxide (1338-23-4)

化学的性質

化学的特性Methyl ethyl ketone peroxide (2-Butanone peroxide) is an organic peroxide with the formula [(CH3)(C2H5)C(O2H)]2O2. MEKP is a colorless oily liquid. It is widely used in vulcanization (crosslinking) of polymers.

Combustible. Gives off irritating or toxic fumes (or gases) in a fire. Risk of fire and explosion on contact with acids, bases or reducing agents.

Health Hazards · 1 件

Extremely destructive to tissue of the mucous membranes, upper respiratory tract, eyes, and skin. Symptoms of exposure include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. (USCG, 1999)

Hazards Summary · 2 件

Liquid causes second or third degree burns after short contact. [CHRIS] Corrosive to the eyes, skin, and upper respiratory tract; [ICSC] After ingestion, effects include corrosion and hepatic failure. [HSDB]

The major hazards encountered in the use and handling of 2-butanone peroxide stem from its toxicologic properties and explosivity. Toxic by all routes (ie, inhalation, ingestion, dermal absorption), exposure to this colorless liquid may occur from its production or use as a curing agent for plastics and polyester resins, and as an initiator in the manufacture of polymers. Effects from exposure may include contact burns to the skin and eyes, hemolytic anemia, shortness-of-breath, or pulmonary edema. OSHA has established a Ceiling limit of 0.7 ppm as a final rule to become effective December 31, 1992. In activities and situations where over-exposure may occur, wear a self-contained breathing apparatus and personal protective clothing. If contact should occur, irrigate exposed eyes with copious amounts of water for at least 30 minutes, and exposed skin for at least 15 minutes. Contaminated clothing and shoes should be removed at the site. 2-Butanone peroxide may be ignited by heat, sparks, or flames; burning rapidly and producing poisonous gases. Containers of this substance may explode from friction, heat, mechanical shock, or contamination (such as from trace amounts of strong acids, bases, metals, metal alloys, salts, sulfur compounds, amines, accelerators, or reducing agents). For fires involving this substance, extinguish with dry chemical, CO2, regular foam, or water (used in flooding quantities for large fires). Fight fire from as far a distance as possible, in an explosion-resistant location. Isolate the area for 1/2 mile in all directions if a tank, rail car, or tank truck is involved. 2-Butanone peroxide should be stored in cool, ventilated areas, away from sunlight, sources of ignition, physical damage, shock, and organic or flammable materials. Smalls spills of this substance should be taken up with a noncombustible absorbent such as vermiculite and placed in a plastic container for immediate disposal. Wet down large spills with water and dike for later disposal. This substance is a good candidate for liquid injection, rotary kiln, or fluidized bed forms of incineration.

Reactive GroupPeroxides, Organic
UN ClassificationUN Hazard Class: 5.2; UN Subsidiary Risks: 1 and 8; UN Pack Group: II
Special Reports · 2 件

Anon; Scientific Basis for Swedish Occupational Standards. VI, Arbetarskyddsstyrelsen, Publikationsservice, 171 84 Solna, Sweden, 133p (1985). ... Compilation of consensus reports on the physical, chemical and toxicological properties and methods of determination of potentially hazardous substances.

DHHS/NTP; NTP Technical Report on Toxicity Studies of Methyl Ethyl Ketone Peroxide in Dimethyl Phthalate Administered Topically to F344/N Rats and B6C3F1 Mice NTP TOX 18 (1993) NIH Pub No. 93-3341

RCRA Requirements · 1 件

U160; As stipulated in 40 CFR 261.33, when 2-butanone peroxide, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5).

Reactivity AlertsExplosive
OSHA StandardsVacated 1989 OSHA PEL Ceiling limit 0.7 ppm (5 mg/cu m) is still enforced in some states.

安全と保護具

Fire Fighting · 2 件

Excerpt from ERG Guide 145 [Organic Peroxides (Heat and Contamination Sensitive)]:

Use water spray, powder, carbon dioxide, dry sand, foam. Combat fire from a sheltered position.

First Aid Measures · 4 件

Fresh air, rest. Half-upright position. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Give one or two glasses of water to drink. Do NOT induce vomiting. Refer for medical attention .

First Aid · 2 件

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

(General first aid procedures)

Safe StorageStore only if stabilized. Well closed. See Chemical Dangers.
Fire Fighting Procedures · 1 件

In case of fire, water should be applied by the sprinkler system or by hose from a safe distance, preferably with a fog nozzle. Foam may be necessary instead if the peroxide is diluted in a low density flammable solvent. Portable extinguishers should not be used except for very small fires. Peroxides threatened by fire should be wetted from a safe distance for cooling. /Peroxides, Organic and Inorganic/

Cleanup Methods · 3 件

Spills should be cleaned up promptly using non-sparking tools and an inert, moist diluent such as vermiculite or sand. Sweepings may be placed in open containers or polyethylene bags and the area washed with water and detergent. Spilled, contaminated, waste or questionable peroxides should be destroyed. /Peroxides, Organic and Inorganic/

Most peroxides can be hydrolyzed by adding them slowly with stirring to about ten times their weight of cold 10% sodium hydroxide solution. The reaction may require several hours. /Peroxides, Organic and Inorganic/

Dilute and drain into the sewer with abundant water. /Hydrogen peroxide/

Nonfire Spill ResponseExcerpt from ERG Guide 145 [Organic Peroxides (Heat and Contamination Sensitive)]:
Disposal Methods · 2 件

Generators of waste (equal to or greater than 100 kg/mo) containing this contaminant, EPA hazardous waste number U160, must conform with USEPA regulations in storage, transportation, treatment and disposal of waste.

A good candidate for liquid injection incineration at a temperature range of 650 to 1,600 °C and a residence time of 0.1 to 2 seconds. A good candidate for rotary kiln incineration at a temperature range of 820 to 1,600 °C and residence times of seconds for liquids and gases, and hours for solids. A good candidate for fluidized bed incineration at a temperature range of 450 to 980 °C and residence times of seconds for liquids and gases, and longer for solids.

Spillage DisposalPersonal protection: chemical protection suit including self-contained breathing apparatus. Collect leaking and spilled liquid in sealable plastic containers as far as possible. Do NOT absorb in saw-dust or other combustible absorbents.
Preventive Measures · 3 件

SRP: The scientific literature for the use of contact lenses in industry is conflicting. The benefit or detrimental effects of wearing contact lenses depend not only upon the substance, but also on factors including the form of the substance, characteristics and duration of the exposure, the uses of other eye protection equipment, and the hygiene of the lenses. However, there may be individual substances whose irritating or corrosive properties are such that the wearing of contact lenses would be harmful to the eye. In those specific cases, contact lenses should not be worn. In any event, the usual eye protection equipment should be worn even when contact lenses are in place.

The worker should immediately wash the skin when it becomes contaminated.

Work clothing that becomes wet or significantly contaminated should be removed and replaced.

Isolation and EvacuationExcerpt from ERG Guide 145 [Organic Peroxides (Heat and Contamination Sensitive)]:
Eye PreventionWear face shield or eye protection in combination with breathing protection.

毒性情報

Interactions · 4 件

Vitamin E, selenium, vitamin C, & methionine were admin to rats in various combinations by diet & ip injections to rank the individual & combined protective ability of the biological antioxidants at minimum daily requirement levels & at pharmacological levels against lipid peroxidation initiated by 50 mg methyl ethyl ketone peroxide (MEKP)/kg. In vivo lipid peroxidation was monitored throughout a 3 hr period by measuring pentane expired in the breath. Rats fed 30 IU DL-alpha-tocopherol acetate/mg diet significantly decreased pentane production at 20 min by 88% compared to rats fed a vitamin E- & selenium-deficient diet. Rats given 5 ip injections of 180 IU DL-alpha-tocopherol acetate/kg further reduced expired pentane by 83% beyond the protection afforded by dietary vitamin E. Neither additive nor synergistic protection was found when other antioxidants were given in combination with vitamin E. Vitamin E was primary protective antioxidant. Pentane expired by individual rats from various treatment groups strongly correlated with the plasma vitamin E status.

Male Sprague-Dawley rats were fed 0, 3, 5 or 10 IU of DL-alpha-tocopherol acetate per kg of diet for 12 wk. After 11 weeks they were injected with 3.3 mg of methyl ethyl ketone peroxide (MEKP)/kg body wt & after 12 wk with 13 mg methyl ethyl ketone peroxide/kg body wt 3-4 hr before decapitation. In the absence of vitamin E, rat brain DNA was significantly damaged by the formation of DNA-protein crosslinks & interstrand DNA crosslinks. Adequate dietary vitamin E protected against this damage. 10 IU/kg was the adequate dose.

In vivo, methyl ethyl ketone peroxide damaged microsomal cytochrome p450 and chytochrome p450 mediated peroxidase in vitamin E-deficient rat liver. Dietary vitamin E treatment of rats protected the microsomal enzymes from peroxide damage. In vivo, adequate levels of vitamin E and of NADH and NADPH are probably necessary to provide important protection to the endoplasmic reticulum during metabolism of methyl ethyl ketone peroxide.

The tumor promoting effect of methyl ethyl ketone peroxide and the influence of diethyl maleate on this effect, with ultraviolet radiation as the tumor initiator, was studied in hairless albino mutant mice. Four groups of 24 animals were irradiated with ultraviolet light at a daily dose of 2,054 Joules/sq m, 5 days per week. Three weeks after completion of irradiation, the animals received skin applications twice weekly for 25 weeks of either 1 microgram per microliter diethyl maleate in acetone, acetone alone followed by 0.5 microgram per microliter methyl ethyl ketone peroxide in dibutyl phthalate, or dibutyl phthalate alone. Other groups of animals were treated with chemicals without ultraviolet light pretreatment. The animals were killed after 46 weeks and examined for tumors. The great majority of animals with tumors were in the irradiated groups. The highest tumor yield occurred in mice exposed to both dibutyl phthalate and methyl ethyl ketone peroxide after untraviolet light. Dibutyl maleate alone had no measureable effect on the development of tumors. Methyl ethyl ketone peroxide produced an increase in tumor prevalence, but the effect was less marked than in the combined presence of methyl ethyl ketone peroxide and diethyl maleate.

Target OrgansEyes, skin, respiratory system, liver, kidneys
Health EffectsMEKP is highly irritating and corrosive to skin and mucous membranes. A number of cases in which people accidentally or deliberately ingested MEKP solutions, occasionally with fatal results, have been reported. (L1789)
Environmental Fate · 3 件

TERRESTRIAL FATE: 2-Butanone peroxide is a mixture of dimers (50%), and trimers (25%), and monomer peroxy compounds(5). Based on a classification scheme(1), an estimated Koc range of 10 to 11,000(SRC), determined from a structure estimation method(2), indicates that 2-butanone peroxide's mobility in soil is expected to range from very high, to essentially immobile based upon an estimated Koc range of 10 to 11,000(SRC). Volatilization of 2-butanone peroxide from moist soil surfaces is not expected to be an important fate process(SRC) given an estimated Henry's Law constant range of 1X10-10 to 2X10-8 atm-cu m/mole(SRC), using a fragment constant estimation method(3). 2-Butanone peroxide is not expected to volatilize from dry soil surfaces(SRC) based upon an estimated vapor pressure range of 1.4X10-3 to 2X10-3 mm Hg(SRC), determined from a fragment constant method(4).

AQUATIC FATE: 2-Butanone peroxide is a mixture dimers (50%), trimers (25%), and monomer peroxy compounds(8). Based on a classification scheme(1), an estimated Koc range of 10 to 11,000(SRC), determined from an estimation method(2), indicates that some portions of 2-butanone peroxide mixture are not expected to adsorb to suspended solids and sediment(SRC), other portions of the mixture are expected to adsorb strongly. 2-Butanone peroxide may react with organic materials in water expected(3) based upon estimated Henry's Law constants ranging between 1X10-10 and 2X10-8 atm-cu m/mole(SRC), developed using a fragment constant estimation method(4). According to a classification scheme(5), an estimated BCF of 13(SRC), from an estimated log Kow of 2(6) and a regression-derived equation(7), suggests the potential for bioconcentration in aquatic organisms is low.

ATMOSPHERIC FATE: 2-Butanone peroxide is a mixture dimers (50%), trimers (25%), and monomer peroxy compounds(4). According to a model of gas/particle partitioning of semivolatile organic compounds in the atmosphere(1), the 2-butanone peroxide mixture, which has estimated vapor pressures ranging between 1.4X10-3 and 2X10-3 mm Hg at 25 °C(SRC), determined from a fragment constant method(2), is expected to exist solely in the vapor-phase in the ambient atmosphere. Vapor-phase 2-butanone peroxide is degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals(SRC); the half-life for this reaction in air is estimated to range from 1.5 to 2 days(SRC), calculated from its rate constant range of 9X10-12 to 11X10-12 cu cm/molecule-sec at 25 °C(SRC)determined using a structure estimation method(3).

Adverse EffectsOccupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.
Exposure Routes · 3 件

The substance can be absorbed into the body by inhalation and by ingestion.

inhalation, ingestion, skin and/or eye contact

Oral (L1789) ; inhalation (L1789) ; dermal (L1789)

Toxicity SummaryMEPK toxicity could occur through lipid peroxidation. (L1789)
Signs and Symptoms · 6 件

Sore throat. Cough. Burning sensation. Laboured breathing. Shortness of breath.

Redness. Pain. Skin burns.

Redness. Pain. Severe deep burns.

Abdominal pain. Burning sensation in the throat and chest. Shock or collapse.

irritation eyes, skin, nose, throat; cough, dyspnea (breathing difficulty), pulmonary edema; blurred vision; blisters, scars skin; abdominal pain, vomiting, diarrhea; dermatitis; In Animals: liver, kidney damage

Symptoms of acute MEKP poisoning by ingestion have included gastrointestinal bleeding, abdominal bums, necrosis, perforation of the stomach, stricture of the esophagus, severe metabolic acidosis, rapid hepatic failure, rhabdomyolysis, and respiratory insufficiency. Temporary cardiac arrest and toxic myocarditis have also been reported. (L1789)

Ongoing Test Status · 1 件

The following link will take the user to the National Toxicology Program (NTP) Test Agent Search Results page, which tabulates all of the "Standard Toxicology & Carcinogenesis Studies", "Developmental Studies", and "Genetic Toxicity Studies" performed with this chemical. Clicking on the "Testing Status" link will take the user to the status (i.e., in review, in progress, in preparation, on test, completed, etc.) and results of all the studies that the NTP has done on this chemical. [http://ntp-apps.niehs.nih.gov/ntp_tox/index.cfm?fuseaction=ntpsearch.searchresults&searchterm=1338-23-4]

Soil Adsorption/Mobility · 1 件

2-Butanone peroxide is a mixture dimers (50%), trimers (25%), and monomer peroxy compounds(3). Using a structure estimation method based on molecular connectivity indices(1), the Koc for 2-butanone peroxide can be estimated to range from 10 to 11,000(SRC). According to a classification scheme(2), this estimated Koc range suggests that some portions of the 2-butanone peroxide mixture are expected to have very high mobility in soil, whereas other portions of the mixture are expected to be essentially immobile. 2-Butanone peroxide is a strong oxidizing agent(3) and may decompose when brought in contact with organic materials(SRC).

Atmospheric ConcentrationsSOURCE DOMINATED: 2-Butanone peroxide has been qualitatively detected in ambient air samples collected in the vicinity of a fiberglassing plant(1).
Human Toxicity Excerpts · 5 件

CONCN SOLN ARE CORROSIVE TO SKIN & MUCOUS MEMBRANE.

ALL ... /PEROXIDE CATALYSTS/ ARE DANGEROUS TO SKIN & IN PARTICULAR TO MUCOUS MEMBRANE OF EYE ... LIQ PEROXIDES CAN BE ABSORBED BY SKIN, PARTICULARLY METHYL ETHYL KETONE PEROXIDE, WHICH CAN CAUSE CERTAIN PHYSIOLOGICAL DISORDERS (HEMOLYTIC ANEMIA).

13 CASES OF ACUTE POISONING WITH KETONOX WERE DESCRIBED. THE EFFECTS OF POISON RESEMBLED THOSE OBSERVED AFTER POISONING WITH LYES OR ACIDS, WITH VOMITING & GASTRIC MUCOSA DAMAGE INCLUDING NECROSIS. THE TOXIC ORAL DOSE WAS BETWEEN 50 & 100 ML.

... Severe eye hazard.

For more Human Toxicity Excerpts (Complete) data for 2-BUTANONE PEROXIDE (10 total), please visit the HSDB record page.

法規制情報

RCRA Requirements · 1 件

U160; As stipulated in 40 CFR 261.33, when 2-butanone peroxide, as a commercial chemical product or manufacturing chemical intermediate or an off-specification commercial chemical product or a manufacturing chemical intermediate, becomes a waste, it must be managed according to Federal and/or State hazardous waste regulations. Also defined as a hazardous waste is any residue, contaminated soil, water, or other debris resulting from the cleanup of a spill, into water or on dry land, of this waste. Generators of small quantities of this waste may qualify for partial exclusion from hazardous waste regulations (40 CFR 261.5).

CERCLA Reportable Quantities · 1 件

Persons in charge of vessels or facilities are required to notify the National Response Center (NRC) immediately, when there is a release of this designated hazardous substance, in an amount equal to or greater than its reportable quantity of 10 lb or 4.54 kg. The toll free number of the NRC is (800) 424-8802; In the Washington D.C. metropolitan area (202) 426-2675. The rule for determining when notification is required is stated in 40 CFR 302.4 (section IV. D.3.b).

安全データ

OEL
Ceiling: 0.2 ppm (1.5 mg/m3)
wgk
1
tsca
TSCA listed
ridadr
UN 3105 5.2
risk_code
8-22-38-41-43-34-7-35-23-9-62-50/53-61
化審法
(5)-667
安衛法
変異原性物質
消防法
危-5-II
hazard_code
O,Xn,C,T,N
safety_code
17-26-36/37/39-45-14-53-3/7-47-7-61
hazard_class
5.2
packing_group
II
Hazard Classifications
Acute Tox. 4 OralFlam. Liq. 3Org. Perox. DSkin Corr. 1B
ストレージクラス
5.2 - Organic peroxides and self-reacting hazardous materials
有毒物質データの
1338-23-4(Hazardous Substances Data)
危険度評価(NFPA 704基準/消防庁データ)
人的[青]=4
· 5 件

AVAIL AS 60% SOLN IN DIMETHYL PHTHALATE (LUPERSOL DDM) TO SERVE AS CATALYST FOR POLYMERIZING PLASTICS.

Lupersol DEL /is/ a trade mark for 60% methyl ethyl ketone peroxide in dimethyl phthalate; Lupersol DSW /is/ a proprietary trade name for methyl ethyl ketone. A liq fire resistant peroxide containing 11.5% active oxygen.

Lupersol Delta-X /is/ ketone peroxide in dimethyl phthalate diluent; Lupersol DNF /is/ ketone peroxide in proprietary diluent.

Diluents may be any combination of dimethyl phthalate, cyclohexanone peroxide, or diallylphthalate. These diluents provide a stable mixt which under ordinary handling cannot be detonated at room temp.

For more Formulations/Preparations (Complete) data for 2-BUTANONE PEROXIDE (6 total), please visit the HSDB record page.

Household ProductsInformation on 2 consumer products that contain Methyl ethyl ketone peroxide in the following categories is provided:
General Manufacturing Information · 2 件

CBI

2-Butanone, peroxide: ACTIVE

応用分野

用途不飽和ポリエステル樹脂硬化剤

一般的な説明Colorless liquid. Strong irritant to skin and tissue. Used as an initiator for room temperature cure of unsaturated polyester resins.

調製方法 · 1 件

製造方法2-Butanone peroxide is obtained by reacting methyl ethyl ketone with hydrogen peroxide (hydrogen peroxide) in the presence of sulfuric acid. After oxidation, neutralization, separation, dehydration, standing, filtration, and finally adding the solubilizing agent to obtain the finished product.

上流・下流製品情報

上流原料

Hydrogen peroxide (hydrogen peroxide)りん酸オキシドール2-ブタノンSolubilizersフタル酸ジブチルフタル酸ジメチル

下流製品

Glass fiber reinforced plastic cooling tower