[C:1]([O:9][CH2:10][CH3:11])(=[O:8])[CH2:2][C:3]([O:5][CH2:6][CH3:7])=[O:4].[H-].[Na+].CS(O[CH2:19][CH:20]([CH2:26][CH:27]=[CH2:28])[CH2:21][CH2:22][CH2:23][C:24]#[N:25])(=O)=O.C(O)(=O)C>O1CCCC1>[C:24]([CH2:23][CH2:22][CH2:21][CH:20]([CH2:26][CH:27]=[CH2:28])[CH2:19][CH:2]([C:3]([O:5][CH2:6][CH3:7])=[O:4])[C:1]([O:9][CH2:10][CH3:11])=[O:8])#[N:25]A solution of 5410 g of diethyl malonate in 2000 ml of tetrahydrofuran is added to a mixture of 1351 g of 60% sodium hydride in mineral oil in 36 L of tetrahydrofuran over a period of 4 hours, keeping the temperature below 26°, and the mixture is stirred for 1/2 hour. A solution of 3705 g of 6-methanesulfonyloxy-5-(2-propenyl)-hexanenitrile in 200 ml tetrahydrofuran is added rapidly and the mixture is heated under reflux for 24 hours and allowed to cool overnight. The mixture is neutralized to pH 7 with glacial acetic acid (about 1 L) and evaporated to dryness. A solution of the residue in 30 L of ether is washed consecutively with water, saturated sodium bicarbonate solution, water and brine, and evaporated to dryness. The mineral oil is separated in a separatory funnel and the remaining product is washed three times with heptane, concentrated at 80°/0.01 mm Hg, and distilled at 150° to remove diethyl malonate and obtain crude diethyl [5-cyano-2-(2-propenyl)-pentyl]-malonate.