홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Octanoyl chloride → Bromoxynil octanoate

HRID 1111480
인쇄

반응식

HRID 1111480 반응식
[OH-].[Na+].[OH:3][C:4]1[CH:11]=[CH:10][C:7]([C:8]#[N:9])=[CH:6][CH:5]=1.O.[Br-:13].[Ca+2].[Br-:15].ClCl.BrBr.[C:20](Cl)(=[O:28])[CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27]>C1(C)C=CC=CC=1.O>[C:20]([O:3][C:4]1[C:11]([Br:13])=[CH:10][C:7]([C:8]#[N:9])=[CH:6][C:5]=1[Br:15])(=[O:28])[CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 6

HCID 8124Octanoyl chlorideHCID 130194-CyanophenolHCID 14798Sodium Hydroxide2회HCID 24408BromineHCID 24526Chlorine2회HCID 17749113Calcium bromide hydrate

생성물 1

HCID 15533Bromoxynil octanoate
수율 155.9%

시약·촉매·용매 2

HCID 962Water용매HCID 1140Toluene용매

실험 절차

To a 1 L flask fitted with a condenser, mechanical stirrer, condenser, gas inlet port, and a sodium hydroxide scrubber was charged 4-hydroxybenzonitrile (62.5 g, 525 mmol), calcium bromide monohydrate (125.9 g, 577 mmol), and water (350 mls). To the resulting suspension was slowly added a 46% w/w sodium hydroxide solution (160 g, 1838 mmol) such that the temperature did not rise above 30° C. Chlorine gas (85 g, 1197 mmol) was bubbled into the suspension at such a rate that the temperature did not rise above 50° C. and that the bromine fumes were not visible. When the chlorine addition was complete, the suspension was stirred for one hour. To the suspension was charged toluene (300 mls), and octanoyl chloride (89.6 g, 551 mmol) was then added to the rapidly-stirred solution over half an hour, while the temperature was kept below 30° C. When addition was complete, stirring was continued for an hour. Stirring was stopped, the phases were separated and the toluene layer was washed with 15% brine solution (200 mls). The toluene layer was dried by azeotropic distillation of water to give 330 g of a brick red solution of bromoxynil octanoate.

후처리

  1. customTo a 1 L flask fitted with a condenser, mechanical stirrer, condenser, gas inlet port
  2. customdid not rise above 30° C
  3. additionwas then added to the rapidly-stirred solution over half an hour, while the temperature
  4. customwas kept below 30° C
  5. additionWhen addition
  6. stirringstirring
  7. waitwas continued for an hour
  8. stirringStirring
  9. customthe phases were separated
  10. washthe toluene layer was washed with 15% brine solution (200 mls)
  11. dry with materialThe toluene layer was dried by azeotropic distillation of water

출처 및 근거

ORD 기록
ord-1bbc612d29844e458279efa31040388d
출처 데이터셋
uspto-grants-1990_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04980493

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트