홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethyl Sulfoxide → 2-(4-Chloro-2-nitro-phenylamino)-5-methyl-thiophene-3-carbonitrile

HRID 131384
인쇄

반응식

HRID 131384 반응식
[NH2:1][C:2]1[S:3][C:4]([CH3:9])=[CH:5][C:6]=1[C:7]#[N:8].Cl[C:11]1[CH:16]=[CH:15][C:14]([Cl:17])=[CH:13][C:12]=1[N+:18]([O-:20])=[O:19].CS(C)=O.O[Li].O>O>[Cl:17][C:14]1[CH:15]=[CH:16][C:11]([NH:1][C:2]2[S:3][C:4]([CH3:9])=[CH:5][C:6]=2[C:7]#[N:8])=[C:12]([N+:18]([O-:20])=[O:19])[CH:13]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 679Dimethyl SulfoxideHCID 69772,5-DichloronitrobenzeneHCID 168937Lithium hydroxide, monohydrateHCID 6890562-Amino-5-methyl-3-thiophenecarbonitrile

생성물 1

HCID 586259752-(4-Chloro-2-nitro-phenylamino)-5-methyl-thiophene-3-carbonitrile수율 81.2%

시약·촉매·용매 1

HCID 962
Water
용매

실험 절차

Stir in a 3 neck 500 mL round bottom flask, 2-amino-5-methyl-thiophene-3-carbonitrile (124.11 g, 0.898 mol, 1 eauiv.), 1,4-dichloro-2-nitro-benzene (174.15 g, 0.907 mol, 1.01 equiv), and DMSO (1.6 L, 13 vol)) for 15 min. (dark solution). Charge in one portion, LiOH H2O (75.37 g, 1.796 mol, 2 equiv). Began to exotherm from 20.4° C. to 25.5° C. over 10 minutes. After 30 minutes temp reaches 28.1° C. and at 1 hour 30.4° C. Place tap water in the bath around the flask to control the exotherm. Check HPLC at 23 h, which shows 81.2% of desired product. Let continue to stir at ambient temperature for greater reaction conversion. Check HPLC at 39 h, which shows 83.5% of one product. Let stir 40 hours total. Cool with ice/water bath to 17° C. Begin pH adjustment by slowly adding 1 N HCl (1020 mL) to reach pH=7.1. Keep exotherm is at 15-22° C. during the addition. Workup includes: pouring reaction mixture into 22 L bottom outlet flask, rinsing in with CH2Cl2 (5.6 L) and 5% LiCl solution (3.6 L), stirring about 10 min., and allowing layers to separate. The lower layer might be darker than upper layer. Back-extract the aqueous layer with CH2Cl2 (1.5 L). Combine organic layers and wash with 5% LiCl solution (3×1.3 L). Dry organic layer with Na2SO4 (800 g) allowing it to stir 1 hour, filter and evaporate to dryness. Wt.=376 g. Back-extract the combined aqueous layers with CH2Cl2 (0.5 L). Check aq layer by HPLC ˜2 mL aq layer in 15 mL of eluent for product in aq layer. Wash the organic phase with brine (2×500 mL) and finally with 5% LiCl (500 mL). Dry over the weekend with NaSO4 (80 g). Filter and add to other organic layer. For Chromatography, dissolve crude material in methylene chloride (950 g) and charge to a silica gel 60 (2.8 kg pre wetted with heptane) bed on fritted funnel. Some product might crash out on top of silica cake. Rinse flask and add to top of cake with CH2Cl2 (0.3 L) until all of the precipitate is dissolve and onto the column. Elute with heptane (˜16 L), then 25% CH2Cl2 in heptane (˜8 L), then 37.5% CH2Cl2 in heptane (˜8 L), follow by 50% CH2Cl2 in heptane and 100% CH2Cl2. Early Fractions might contain no product. Identify mix fractions containing product and rundown separately until virtually all methylene chloride is gone leaving the product in heptane, cool to 0° C. and filter. Filtrate analysis shows 5% product by area % integration. Combine product only fractions and evaporate to dryness. Add cake from mixed fractions. Combined dry weight=197.4 g. HPLC area percent=97.0% NMR is consistent with desired procduct: Yield 74.8%.

후처리

  1. waitAfter 30 minutes temp reaches 28.1° C.
  2. waitat 1 hour 30.4° C
  3. customat 23 h

출처 및 근거

ORD 기록
ord-2f65cab2b8024199810304afe6c9cec4
출처 데이터셋
uspto-grants-2008_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07384934B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트