홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Butyl vinyl ether → Methyl 2-acetyl-5-methoxybenzoate

HRID 1471341
인쇄

반응식

HRID 1471341 반응식
Br[C:2]1[CH:11]=[CH:10][C:9]([O:12][CH3:13])=[CH:8][C:3]=1[C:4]([O:6][CH3:7])=[O:5].[CH:14]([O:16]CCCC)=[CH2:15].C1C=CC(P(C2C=CC=CC=2)C2C=CC=CC=2)=CC=1.CCN(CC)CC>CC#N.O.CC([O-])=O.CC([O-])=O.[Pd+2]>[C:14]([C:2]1[CH:11]=[CH:10][C:9]([O:12][CH3:13])=[CH:8][C:3]=1[C:4]([O:6][CH3:7])=[O:5])(=[O:16])[CH3:15]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 8108Butyl vinyl etherHCID 8471TriethylamineHCID 11776TriphenylphosphineHCID 2776849Methyl 2-bromo-5-methoxybenzoate

생성물 1

HCID 59373119Methyl 2-acetyl-5-methoxybenzoate수율 99.6%

시약·촉매·용매 3

HCID 167845
palladium(II) acetate
촉매
HCID 962Water용매
HCID 6342Acetonitrile용매

반응 조건

온도
99 °C

실험 절차

A mixture of methyl 2-bromo-5-methoxybenzoate (1) (5.0 g, 20.4 mmol), butyl vinyl ether (13.1 mL, 102.0 mmol), Ph3P (802.3 mg, 3.1 mmol), Et3N (3.7 mL, 26.5 mmol), and Pd(OAc)2 (343.0 mg, 1.5 mmol) in MeCN (40 mL) is stirred under argon at 99° C. for 16.5 h and then cooled to room temperature. The residue is diluted with H2O (50 mL), and the resultant suspension is filtered through Celite® (H2O rinse). The filtrate is concentrated to dryness at reduced pressure. To the residue is added tetrahydrofuran (125 mL) and 10% HCl (125 mL). The mixture is stirred for 2 h before the tetrahydrofuran is removed at reduced pressure. This residue is extracted with ethyl acetate (100 mL, 70 mL, and 60 mL). The extract is washed (brine) and dried. After solvent removal at reduced pressure, the residue is purified on silica gel (16.7% to 33.3% ethyl acetate/hexane) to give 4.23 g (99%) of 2 as a yellow liquid. IR 2958, 1730, 1683, 1270 cm−1; 1H NMR (CDCl3) δ 2.55 (s, 3H, CH3CO), 3.90 (s, 3H, CH3O), 3.94 (s, 3H, CO2CH3), 7.04 (dd, J=8.7, 2.7 Hz, 1H, 4-PhH), 7.17 (d, J=2.7 Hz, 1H, 6-PhH), 7.61 ppm (d, J=8.7 Hz, 1H, 3-PhH).

후처리

  1. temperaturecooled to room temperature
  2. filtrationthe resultant suspension is filtered through Celite® (H2O rinse)
  3. concentrationThe filtrate is concentrated to dryness at reduced pressure
  4. additionTo the residue is added tetrahydrofuran (125 mL) and 10% HCl (125 mL)
  5. stirringThe mixture is stirred for 2 h before the tetrahydrofuran
  6. customis removed at reduced pressure
  7. extractionThis residue is extracted with ethyl acetate (100 mL, 70 mL, and 60 mL)
  8. washThe extract is washed (brine)
  9. customdried
  10. customAfter solvent removal at reduced pressure
  11. customthe residue is purified on silica gel (16.7% to 33.3% ethyl acetate/hexane)

출처 및 근거

ORD 기록
ord-009de23dcdc3478ca1f1f6c9e8ccccf3
출처 데이터셋
uspto-grants-2015_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09012217B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트