홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Hydroxide → 2-Butyl-5-chloro-1H-imidazole-4-carbaldehyde

HRID 1735505
인쇄

반응식

HRID 1735505 반응식
Cl.C[O:3][C:4](=O)[CH2:5][NH2:6].[OH-].[Na+].[C:10](=N)(OC)[CH2:11][CH2:12][CH2:13]C.CO[CH:20](OC)[N:21]([CH3:23])C.O=P(Cl)(Cl)[Cl:28]>CO.C1(C)C=CC=CC=1>[CH2:10]([C:20]1[NH:21][C:23]([Cl:28])=[C:5]([CH:4]=[O:3])[N:6]=1)[CH2:11][CH2:12][CH3:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 14798Sodium HydroxideHCID 24813Phosphorus oxychlorideHCID 78373Dimethylformamide dimethyl acetalHCID 122755Glycine methyl ester hydrochlorideHCID 5743466Methyl pentanimidate2회

생성물 1

HCID 551762-Butyl-5-chloro-1H-imidazole-4-carbaldehyde수율 79.9%

시약·촉매·용매 2

HCID 887Methanol용매HCID 1140Toluene용매2회

반응 조건

온도
100 °C

실험 절차

31.72 g (250 mmol) of glycine methyl ester hydrochloride was added in a single portion to a solution of 10.13 g (250 mmol) of sodium hydroxide in 80 ml of methanol at 0° C. The temperature dropped to -10° C. The mixture was stirred for 10 minutes, during which time the temperature rose again to 0° C. 108.25 g (a 26.6 percent strength solution in toluene, 250 mmol) of methyl pentanimidate was added, and the mixture was stirred at room temperature for 3 hours. 35.64 g (about 92 percent strength, 275 mmol) of dimethylformamide dimethyl acetal then was added, during the course of 5 minutes. The reaction mixture was stirred for an additional 3 hours. 200 ml of toluene was added, and methanol and water were removed from the mixture by distillation in vacuo. Of the remaining 203.5 g, 91.68 g (corresponding to 112 mmol of methyl pentanimidate) was initially introduced at room temperature and treated with 65.09 g (416 mmol) of POCl3. The mixture was heated 15 100° C. for 1.5 hours and then 118.5 g of POCl3 /toluene was distilled off and the residue was treated with 121 ml of ethyl acetate and 408 ml of water. The pH was adjusted to 1, by addition of 18 ml of 30 percent strength sodium hydroxide solution, and the phases were separated. The aqueous phase was extracted twice, each time with 200 ml of ethyl acetate, and the combined organic-phases were washed with 200 ml of water, dried (MgSO4), and filtered and concentrated. The residue was dried in a high vacuum. 14.07 g of 2-butyl -5-chloroimidazole-4-carbaldehyde (HPLC content 79.9 percent) was obtained. This corresponds to a yield of 56 percent, based on the methyl pentanimidate.

후처리

  1. additionThe temperature dropped to -10° C
  2. customrose again to 0° C
  3. stirringthe mixture was stirred at room temperature for 3 hours
  4. stirringThe reaction mixture was stirred for an additional 3 hours
  5. custommethanol and water were removed from the mixture by distillation in vacuo
  6. distillation118.5 g of POCl3 /toluene was distilled off
  7. additionthe residue was treated with 121 ml of ethyl acetate and 408 ml of water
  8. additionThe pH was adjusted to 1, by addition of 18 ml of 30 percent strength sodium hydroxide solution
  9. customthe phases were separated
  10. extractionThe aqueous phase was extracted twice
  11. washeach time with 200 ml of ethyl acetate, and the combined organic-phases were washed with 200 ml of water
  12. dry with materialdried (MgSO4)
  13. filtrationfiltered
  14. concentrationconcentrated
  15. customThe residue was dried in a high vacuum

출처 및 근거

ORD 기록
ord-0c4062189b8b48a5a72fc9668bad62a6
출처 데이터셋
uspto-grants-1996_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05536841

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트