홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → (1R*,5S*)-3-(4-bromo-2,6-dimethylphenyl)-1-methyl-8-oxabicyclo[3.2.1]octane-2,4-dione

HRID 341654
인쇄

반응식

HRID 341654 반응식
[CH3:1][C@@:2]12[O:9][C@@H:6]([CH2:7][CH2:8]1)[C:5](=[O:10])[CH2:4][C:3]2=[O:11].C(Cl)(Cl)Cl.C([O-])(=O)C.C([O-])(=O)C.C([O-])(=O)C.[Br:28][C:29]1[CH:34]=[C:33]([CH3:35])[C:32]([Pb+3])=[C:31]([CH3:37])[CH:30]=1.Cl>CN(C)C1C=CN=CC=1.C1(C)C=CC=CC=1>[Br:28][C:29]1[CH:34]=[C:33]([CH3:35])[C:32]([CH:4]2[C:5](=[O:10])[C@H:6]3[O:9][C@:2]([CH3:1])([CH2:8][CH2:7]3)[C:3]2=[O:11])=[C:31]([CH3:37])[CH:30]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 6212ChloroformHCID 67533518(1R*,5S*)-1-methyl-8-oxabicyclo[3.2.1]octane-2,4-dioneHCID 178476520[Diacetyloxy-(4-bromo-2,6-dimethylphenyl)plumbyl] acetate

생성물 1

HCID 68767179(1R*,5S*)-3-(4-bromo-2,6-dimethylphenyl)-1-methyl-8-oxabicyclo[3.2.1]octane-2,4-dione수율 7.6%

시약·촉매·용매 2

HCID 142844-(Dimethylamino)pyridine촉매HCID 1140Toluene용매

반응 조건

온도
80 °C

실험 절차

(1R*,5S*)-1-Methyl-8-oxabicyclo[3.2.1]octane-2,4-dione (6 g, 0.039 mol) and 4-dimethylaminopyridine (24 g, 0.196 mol) are added to a mixture of chloroform (120 ml) and toluene (30 ml). The reaction mixture is flushed with nitrogen for 15 minutes at ambient temperature. 4-Bromo-2,6-dimethylphenyllead triacetate (24 g, 0.042 mol) is added in one portion and the reaction mixture is stirred and heated to 80° C. (pre-heated oil bath) under an atmosphere of nitrogen for 1 hour. The reaction mixture is cooled to room temperature, acidified to pH 1 with 2N aqueous hydrochloric acid, filtered through a plug of diatomaceous earth and the two phases are separated. The aqueous phase is extracted with dichloromethane (2×100 ml), the organic phases are combined, washed with water, and dried over anhydrous sodium sulfate. The mixture is filtered, and the filtrate is evaporated under reduced pressure. The residue is purified by column chromatography on silica gel to give (1R*,5S*)-3-(4-bromo-2,6-dimethylphenyl)-1-methyl-8-oxabicyclo[3.2.1]octane-2,4-dione as a white solid (1 g).

후처리

  1. customThe reaction mixture is flushed with nitrogen for 15 minutes at ambient temperature
  2. temperature(pre-heated oil bath) under an atmosphere of nitrogen for 1 hour
  3. temperatureThe reaction mixture is cooled to room temperature
  4. filtrationfiltered through a plug of diatomaceous earth
  5. customthe two phases are separated
  6. extractionThe aqueous phase is extracted with dichloromethane (2×100 ml)
  7. washwashed with water
  8. dry with materialdried over anhydrous sodium sulfate
  9. filtrationThe mixture is filtered
  10. customthe filtrate is evaporated under reduced pressure
  11. customThe residue is purified by column chromatography on silica gel

출처 및 근거

ORD 기록
ord-31c2b32d57334f5bbfe84f83c6ad87cb
출처 데이터셋
uspto-grants-2014_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08895761B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트