홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Triphenylphosphine → 3-Bromo-5-((tetrahydro-2H-pyran-4-yl)oxy)pyridine

HRID 472892
인쇄

반응식

HRID 472892 반응식
[Br:1][C:2]1[CH:3]=[C:4]([OH:8])[CH:5]=[N:6][CH:7]=1.[O:9]1[CH2:14][CH2:13][CH:12](O)[CH2:11][CH2:10]1.C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1>C1(C)C=CC=CC=1.Cl>[Br:1][C:2]1[CH:7]=[N:6][CH:5]=[C:4]([O:8][CH:12]2[CH2:13][CH2:14][O:9][CH2:10][CH2:11]2)[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 11776TriphenylphosphineHCID 74956Tetrahydro-4H-pyran-4-olHCID 5995293-Bromo-5-hydroxypyridine

생성물 1

HCID 219640263-Bromo-5-((tetrahydro-2H-pyran-4-yl)oxy)pyridine

시약·촉매·용매 2

HCID 313Hydrochloric Acid용매HCID 1140Toluene용매

반응 조건

온도
60 °C

실험 절차

A solution of 5-bromopyridin-3-ol (146 g, 834 mmol), tetrahydro-2H-pyran-4-ol (128 g, 1250 mmol), and triphenylphosphine (329 g, 1250 mmol) in toluene (2.0 L) was heated to reflux, and 750 mL of distillate was removed via a Dean-Stark trap. The reaction mixture was cooled to 60° C., and 547 g (1.25 mol) of a 40% (w/w) solution of DEAD in toluene was added drop-wise over a 1 hour period. The addition was exothermic with the reactor temperature at the end of addition near 95° C. The reaction mixture was stirred at 115° C. for 18 h, and a portion of the reaction solution was sampled and analyzed by HPLC to establish that the reaction was complete. Upon completion of reaction, 500 mL of solvent was removed by distillation, and the pot residue was cooled to ambient temperature. This organic layer was washed with 10% aqueous sodium hydroxide (2×0.50 L) and concentrated under vacuum to produce a viscous oil, which was dissolved in 2N hydrochloric acid (1.0 L). Diatomaceous earth (100 g) was added with stirring and the resulting suspension was filtered. The pad was rinsed with 2N hydrochloric acid (1.0 L), and the filtrates were combined and extracted with diisopropyl ether (500 mL). The diisopropyl ether layer was discarded, and the aqueous layer was treated with carbon black (10 g) and stirred at 45-50° C. for 1 h. The suspension was filtered through a pad of diatomaceous earth (25 g). The filtrate was collected, cooled to 5° C., and the pH adjusted with 50% aqueous sodium hydroxide (250 mL) to pH=13. The solution was extracted twice with chloroform (1.0 L, 600 mL), and the chloroform extracts were combined and concentrated under vacuum to give 12 as a dark red viscous oil/low melting solid (187 g, 87%), which was used without further purification. 1H NMR (CDCl3, 400 MHz) δ 8.29 (s, 1H), 8.24 (s, 1H), 7.38 (s, 1H), 4.52 (m, 1H), 3.98 (m, 2H), 3.60 (m, 2H), 2.05 (m, 2H), 1.81 (m, 2H).

후처리

  1. temperatureto reflux
  2. custom750 mL of distillate was removed via a Dean-Stark trap
  3. addition547 g (1.25 mol) of a 40% (w/w) solution of DEAD in toluene was added drop-wise over a 1 hour period
  4. additionThe addition
  5. additionwas exothermic with the reactor temperature at the end of addition near 95° C
  6. aliquota portion of the reaction solution was sampled
  7. customUpon completion of reaction, 500 mL of solvent
  8. customwas removed by distillation
  9. temperaturethe pot residue was cooled to ambient temperature
  10. washThis organic layer was washed with 10% aqueous sodium hydroxide (2×0.50 L)
  11. concentrationconcentrated under vacuum
  12. customto produce a viscous oil, which
  13. additionDiatomaceous earth (100 g) was added
  14. stirringwith stirring
  15. filtrationthe resulting suspension was filtered
  16. washThe pad was rinsed with 2N hydrochloric acid (1.0 L)
  17. extractionextracted with diisopropyl ether (500 mL)
  18. additionthe aqueous layer was treated with carbon black (10 g)
  19. stirringstirred at 45-50° C. for 1 h
  20. filtrationThe suspension was filtered through a pad of diatomaceous earth (25 g)
  21. customThe filtrate was collected
  22. temperaturecooled to 5° C.
  23. extractionThe solution was extracted twice with chloroform (1.0 L, 600 mL)
  24. concentrationconcentrated under vacuum

출처 및 근거

ORD 기록
ord-6d2b23f8451c40d1a35a3282a151ecc0
출처 데이터셋
uspto-grants-2014_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08633227B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트