홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

N,N,N',N'-Tetramethylazodicarboxamide → O-(Diphenylphosphinyl)hydroxylamine

HRID 73648
노트
인쇄 미리보기

반응식

HRID 73648 반응식
[OH-:1].[Na+].CN(C(N=NC(N(C)C)=O)=O)C.Cl.[NH2:16]O.[C:18]1([P:24](Cl)([C:26]2[CH:31]=[CH:30][CH:29]=[CH:28][CH:27]=2)=[O:25])[CH:23]=[CH:22][CH:21]=[CH:20][CH:19]=1>O.O1CCOCC1>[NH2:16][O:25][P:24](=[O:1])([C:26]1[CH:31]=[CH:30][CH:29]=[CH:28][CH:27]=1)[C:18]1[CH:23]=[CH:22][CH:21]=[CH:20][CH:19]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 4278N,N,N',N'-TetramethylazodicarboxamideHCID 14798Sodium HydroxideHCID 73910Diphenylphosphinic chlorideHCID 443297Hydroxyamine hydrochloride

생성물 1

HCID 10955453O-(Diphenylphosphinyl)hydroxylamine수율 82.5%

시약·촉매·용매 2

HCID 962Water
용매
2회
HCID 312751,4-Dioxane용매2회

반응 조건

온도
0 °C

실험 절차

A 5 L 4-neck round bottom flask (rbf) fitted with an overhead stirrer & a thermocouple was charged with; (1) a solution of NaOH (60.85 g, 1.52 mol, 2.4 eq) in 180 mL water, (2) a solution of hydroxylamine-HCl (110.12 g, 1.58 mol, 2.5 eq) in 180 mL water and (3) 180 mL dioxane. The mixture was cooled in an ice/acetone bath to 0° C. 150 g of ice was added, followed by a precooled (to about 10° C.) solution of diphenylphosphinic chloride (150.0 g, 0.634 mol, 1 eq) in 180 mL dioxane (added all at once). The reaction became very thick with a white precipitate, requiring vigorous stirring. The internal temperature rose to 22° C. After 5 additional minutes stirring (10 minutes maximum), the reaction mixture was diluted with 2.5 L of ice cold water and filtered thru a large fritted funnel (15 cm diameter). The crude material was left on the frit to drain for one hour, then transferred back into the 5 L rbf. The solid was suspended in 500 mL ice cold 0.25N NaOH solution and vigorously stirred for five minutes (no more than 10 min), then filtered again, washing 2× with ice cold water and left to dry overnight on the fritted filter. The partially dried material was dried for 12 h in a vacuum oven (50° C., 0.1 torr) and then well crushed with a mortar & pestal. An additional 16 h of drying in the vacuum oven afforded 122 g (82%) the above compound as a white powder.

후처리

  1. customA 5 L 4-neck round bottom flask (rbf) fitted with an overhead stirrer
  2. additiona thermocouple was charged with
  3. additionadded all at once)
  4. customrose to 22° C
  5. filtrationfiltered
  6. waitThe crude material was left on the frit
  7. waitto drain for one hour
  8. stirringvigorously stirred for five minutes (no more than 10 min)
  9. filtrationfiltered again
  10. washwashing 2× with ice cold water
  11. waitleft
  12. customto dry overnight on the fritted filter
  13. customThe partially dried material was dried for 12 h in a vacuum oven (50° C., 0.1 torr)
  14. customwell crushed with a mortar & pestal
  15. customAn additional 16 h of drying in the vacuum oven

출처 및 근거

ORD 기록
ord-b2e4355bacd546f2952490ef96acf714
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08829185B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트