Isoquinoline → 5-Bromoisoquinoline

HRID 8710

반응식

HRID 8710 반응식
[CH:1]1[C:10]2[C:5](=[CH:6][CH:7]=[CH:8][CH:9]=2)[CH:4]=[CH:3][N:2]=1.[Al+3].[Cl-].[Cl-].[Cl-].[Br:15]Br.[OH-].[Na+].[Al].O=[Al-]=O.[Na+]>>[Br:15][C:6]1[CH:7]=[CH:8][CH:9]=[C:10]2[C:5]=1[CH:4]=[CH:3][N:2]=[CH:1]2

참가 물질

7

반응 조건

온도
75 °C

실험 절차

The apparatus was a 500 mL three-necked flask equipped with a condenser, dropping funnel, and a stirrer terminating in a stiff, crescent-shaped Teflon polytetrafluroethylene paddle. To the isoquinoline (57.6 g, 447 mmol) in the flask was added AlCl3 (123 g, 920 mmol). The mixture was heated to 75–85° C. Bromine (48.0 g, 300 mmol) was added using a dropping funnel over a period of 4 hours. The resulting mixture was stirred for one hour at 75° C. The almost black mixture was poured into vigorously hand-stirred cracked ice. The cold mixture was treated with sodium hydroxide solution (10 N) to dissolve all the aluminum salts as sodium aluminate and the oily layer was extracted with ether. After being dried with Na2SO4 and concentrated, the ether extract was distilled at about 0.3 mm. A white solid (16.3 g, 78 mmol) from a fraction of about 125° C. was obtained (26% yield). The product was further purified by recrystallization (pentane or hexanes): mp 80–81° C.;

후처리

  1. customequipped with a condenser
  2. customterminating in a stiff, crescent-shaped Teflon polytetrafluroethylene paddle
  3. temperatureThe mixture was heated to 75–85° C
  4. customof 4 hours
  5. additionThe almost black mixture was poured
  6. stirringinto vigorously hand-stirred
  7. extractionthe oily layer was extracted with ether
  8. dry with materialAfter being dried with Na2SO4
  9. concentrationconcentrated
  10. extractionthe ether extract
  11. distillationwas distilled at about 0.3 mm

출처 및 근거

ORD 기록
ord-b9469d6f4a4846c6b2874fbf0254c2dd
출처 데이터셋
uspto-grants-2006_08
특허 번호
US07091212B2

연결된 노트

불러오는 중…