反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
PROCEDURE
实验过程
A solution of 1.37 g (10×1.2 mmole) of methanesulfonyl chloride in dichloromethane (10 ml) was added dropwise to 3.28 g (10.0 mmole) of 4-(2,5-dimethoxy-3,4,6-trimethylphenyl)-4-phenylbutan -1-ol and 2.10 ml (10×1.5 mmole) of triethylamine dissolved in dichloromethane (30 ml) at -5° C. over the period of 30 minutes, and the reaction was continued for 20 minutes under stirring, with ice cooling. The reaction was stopped by adding cold water to the reaction solution, and the dichloromethane layer was separated out, washed with cold dilute hydrochloric acid and aqueous sodium chloride solution successively, dried (magnesium sulfate) and evaporated. The residue was dissolved in acetone (50 ml), and 4.5 g (10×3 mmole) of sodium iodide was added to the solution, followed by stirring at 50° C. for 2 hours. The acetone was distilled off, and isopropyl ether and water were added to the residue to extract the product. The isopropyl ether layer was separated out, washed with aqueous sodium chloride solution, and evaporated, and the residual solution was chromatographed on a silica gel column to perform purification (elution with hexane/isopropyl ether) to thereby give 4.07 g (93%) of 1-iodo-4-(2,5-dimethoxy-3,4,6-trimethylphenyl)-4-phenylbutane. Its typical physical properties and nuclear magnetic resonance spectrum data are shown in Table 14.
WORKUP
后处理
- customthe dichloromethane layer was separated out
- washwashed with cold dilute hydrochloric acid and aqueous sodium chloride solution successively
- dry with materialdried (magnesium sulfate)
- customevaporated
- dissolutionThe residue was dissolved in acetone (50 ml)
- stirringby stirring at 50° C. for 2 hours
- distillationThe acetone was distilled off
- additionisopropyl ether and water were added to the residue
- extractionto extract the product
- customThe isopropyl ether layer was separated out
- washwashed with aqueous sodium chloride solution
- customevaporated
- customthe residual solution was chromatographed on a silica gel column
- custompurification (elution with hexane/isopropyl ether)