HRID600119

反应详情

EQUATION

反应方程式

HRID 600119 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

3

CONDITIONS

反应条件

温度
45 °C

PROCEDURE

实验过程

There were mixed 12.68 g (0.022 mole) of N,N-bis(bi-phenyl-4-yl)-N′-phenyl-4,4′-diaminobiphenyl, 5.00 g (0.01 mole) of 4,4″-diiodo-p-terphenyl, 4.14 g (0.030 mole) of anhydrous potassium carbonate, 0.32 g (0.005 mole) of copper powder and 10 ml of n-dodecane, followed by reaction at 195 to 210° C. for 30 hours. The reaction product was extracted with 800 ml of toluene, and the insoluble matter was removed by filtration. Then, the filtrate was concentrated. After the concentration, 100 ml of methanol was added to perform crystallization, and suction filtration was performed to obtain crude crystals. The crude crystals were dissolved in 300 ml of toluene under reflux, and allowed to cool down to 45° C. Then, 300 ml of ethyl acetate was added dropwise to perform crystallization, thereby obtaining crystals. N,N′-bis[4-{bis(biphenyl-4-yl)amino}biphenyl-4′-yl]-N,N′-diphenyl-4,4″-diamino-p-terphenyl was obtained in an amount of 9.43 g. The yield was 65.9%, and the HPLC purity was 94.7%. The crystals were purified by column chromatography (carrier: silica gel, eluate: toluene/n-hexane=1/2) to obtain 5.47 g (HPLC purity: 100.0%, column purification yield: 61.3%) of N,N′-bis[4-{bis(biphenyl-4-yl)amino}biphenyl-4′-yl]-N,N′-diphenyl-4,4″-diamino-p-terphenyl. The melting point was 204.5° C. Identification of the product was performed by NMR analysis, elemental analysis and IR analysis. The elemental analysis values are as follows: carbon; measured value; 90.22% (theoretical value; 90.37%), hydrogen; measured value; 5.73% (theoretical value; 5.50%), nitrogen; measured value; 4.05% (theoretical value; 4.13%). The results of NMR analysis were as follows: 7.637-7.396 ppm (40H), 7.336-7.172 (32H), 7.081-7.029 ppm (2H).

WORKUP

后处理

  1. customfollowed by reaction at 195 to 210° C. for 30 hours
  2. extractionThe reaction product was extracted with 800 ml of toluene
  3. customthe insoluble matter was removed by filtration
  4. concentrationThen, the filtrate was concentrated
  5. concentrationAfter the concentration, 100 ml of methanol
  6. additionwas added
  7. customcrystallization, and suction filtration
  8. customto obtain crude crystals
  9. temperatureunder reflux
  10. customcrystallization
  11. customobtaining crystals