反应详情
EQUATION
反应方程式
REACTANTS
反应物
PRODUCTS
生成物
AUXILIARIES
试剂、催化剂与溶剂
CONDITIONS
反应条件
- 温度
- 115 °C
PROCEDURE
实验过程
2,5-Diamino-4,6-dihydroxypyrimidine hydrochloride (0.14 mol, 25 g) was filled into a dry reactor. Dry 1,2,3-trichloropropane (51.96 ml) was then added and the whole was stirred. Subsequently, tetramethylammonium chloride (0.29 mol, 31.25 g) and then POCl3 (0.54-0.81 mol, 124.9-83.28 g, 50.6-75.9 ml) were added. The reaction was heated at reflux temperature (about 115° C.) for 24 h. The reaction was then cooled to below 50° C., ice water (24.44 mol, 440.44 g) was added and the whole was kept below 55° C. Subsequently, the reaction was adjusted to a pH of between 6.5 and 7.0 using 50% strength NaOH (3.12 mol, 124.92 g, 163.3 ml) and the temperature was kept below 55° C. The reaction was stirred at between 50 and 60° C. for 30 min. Tetrahydrofuran (3.7 mol, 267.0 g, 300 ml) was then added. In order to remove undesired material, the whole mixture was filtered through Celite and the filter cake was then washed with ethyl acetate (20.5 mol, 1806.58 g, 2002.86 ml) for subsequent extraction. The organic phase (tetrahydrofuran and ethyl acetate) was washed 3 times with water (5.57 mol, 100.32 g, 100.32 1), dried over NaHCO3 and filtered. Ethyl acetate was removed by vacuum distillation. Hexane (0.77 mol, 66.14 g, 100.36 ml) was then added to the residual organic material, and the whole was cooled to below 10° C., filtered and then dried at 50° C. in vacuo. The title product (0.09 mol, 15.71 g) was obtained as a slightly brownish solid, corresponding to a yield of about 65% based on 2,5-diamino-4,6-dihydroxypyrimidine employed.
WORKUP
后处理
- temperatureThe reaction was heated
- temperatureThe reaction was then cooled to below 50° C.
- customwas kept below 55° C
- customwas kept below 55° C
- stirringThe reaction was stirred at between 50 and 60° C. for 30 min
- customIn order to remove undesired material
- filtrationthe whole mixture was filtered through Celite
- dry with materialdried over NaHCO3
- filtrationfiltered
- customEthyl acetate was removed by vacuum distillation
- temperaturethe whole was cooled to below 10° C.
- filtrationfiltered
- customdried at 50° C. in vacuo