StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Carbon Dioxide → Carbon Dioxide

HRID 1588211
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1588211
[C:1](=[O:3])=[O:2].[C:4](=[O:7])(O)[O-:5].[Cs+].[CH3:9][OH:10]>[Cu].[Cr]([O-])([O-])=O.[Cu].[Cr].O>[C:1](=[O:3])=[O:2].[CH:9]([O:5][CH3:4])=[O:10].[CH3:1][O:7][CH3:4]
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

10

Edukt 3

HCID 280Carbon DioxideHCID 887Methanol2×HCID 2734983Cesium bicarbonate

Produkt 3

HCID 280Carbon DioxideAusbeute 0,8 %HCID 7865Methyl formateAusbeute 0,4 %HCID 8254Dimethyl EtherAusbeute 0,07 %

Reagenzien, Katalysatoren, Lösungsmittel 4

HCID 23976ChromiumKatalysatorHCID 23978CopperKatalysatorHCID 178505379HCID 178505379, VerbindungKatalysatorHCID 962WaterLösungsmittel

Versuchsvorschrift

Synthesis gas having an inlet composition of 66.6% H2, 33.3% CO and 0.1% CO2 was fed to a 300 cc. stainless steel autoclave charged with 3 gms. copper-chromite (containing 31.1% copper and 29% chromium , 1.67 gms. cesium bicarbonate and 150 cc. methanol, reduced in situ using a stream of pure H2 flowing at 25 cc/min. for 16 hours at 170° C. Both catalysts were added separately in the powder form. The reactor was pressurized to 910 psig. and the temperature was adjusted to 150° C. Synthesis gas at a flow rate of 105 cc/min. (measured under standard conditions) was made to react under isothermal conditions. After an initial transient period, the process reached a steady state with respect to the amount of synthesis gas converted. A methanol production rate based on H2 consumption of 15.66 gmoles/h/kg catalyst was obtained with 54% synthesis gas conversion and 95% selectivity towards methanol. An exit gas composition of 63% H2, 35% CO, 0.8% CO2, 0.7% methanol, 0.4% methyl formate, 0.2% H2O and 0.07% dimethyl ether was obtained. A liquid composition of 95.6% methanol, 4% methyl formate, 0.3% water and traces of dimethyl ether and dissolved gases was obtained.

Aufarbeitung

  1. customSynthesis gas
  2. customfor 16 hours
  3. customat 170° C
  4. additionBoth catalysts were added separately in the powder form
  5. customwas adjusted to 150° C
  6. customSynthesis gas at a flow rate of 105 cc/min. (measured under standard conditions)
  7. customto react under isothermal conditions
  8. customto the amount of synthesis gas
  9. customA methanol production rate based on H2 consumption of 15.66 gmoles/h/kg catalyst
  10. customwas obtained with 54% synthesis gas conversion and 95% selectivity towards methanol

Quellen und Nachweise

ORD-Eintrag
ord-f6ff02504ab74c7785b8a8a6d1fee67d
Quelldatensatz
uspto-grants-1993_06
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US05221652

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion