StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Sulfuric Acid → 4-Methoxycinnamate methyl ester

HRID 327913
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 327913
[CH3:1][O:2][C:3]1[CH:8]=[CH:7][C:6](N)=[CH:5][CH:4]=1.S(=O)(=O)(O)O.N([O-])=O.[Na+].N(O)=O.[C:22]([O:26][CH3:27])(=[O:25])[CH:23]=[CH2:24]>C(O)(=O)C.[Pd].C(N)(C)(C)C.O>[CH3:1][O:2][C:3]1[CH:8]=[CH:7][C:6]([CH:24]=[CH:23][C:22]([O:26][CH3:27])=[O:25])=[CH:5][CH:4]=1
KomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

10

Edukt 5

HCID 1118Sulfuric AcidHCID 7294Methyl AcrylateHCID 7732P-AnisidineHCID 24529Nitrous AcidHCID 23668193Sodium Nitrite

Produkt 1

HCID 928414-Methoxycinnamate methyl esterAusbeute 99 %

Reagenzien, Katalysatoren, Lösungsmittel 4

HCID 6385Tert-ButylamineKatalysatorHCID 23938PalladiumKatalysatorHCID 176Acetic AcidLösungsmittelHCID 962WaterLösungsmittel

Versuchsvorschrift

p-Anisidine (12.3 g) was dissolved in 55 ml acetic acid and 15 ml water and cooled to 10° C. 98% Sulfuric acid (15 g) was added slowly with agitation while cooling the reaction vessel, a 500 ml three necked round bottom flask equipped with stirrer, thermometer, dropping funnel and cooling bath. Sodium nitrite (6.9 g dissolved in 20 ml water) was then added at 0°-2° C. over one hour while stirring. Excess nitrous acid was then neutralized by the addition of 0.05 g t-butylamine. After 10 minutes, palladium (O) dibenzylidene acetone (Pd(dba)2, 0.15 g) was added followed by methyl acrylate (12.9 g) and butylated hydroxytoluene (0.03 g). The cooling bath was then removed and the temperature allowed to slowly reach ambient conditions (25° C.). After 22 hours of stirring, the acid was neutralized with excess 10% sodium hydroxide solution (aqueous) and the mixture allowed to separate. The aqueous layer was separated and extracted twice with 20 ml portions of ethyl ether. The ether layers were combined with the organic phase, concentrated on a rotary evaporator to remove the ether and distilled to give 19.0 g of methyl p-methoxycinnamate (99% yield, purity 95% by GC).

Aufarbeitung

  1. temperaturewhile cooling the reaction vessel
  2. temperaturecooling bath
  3. customThe cooling bath was then removed
  4. customallowed to slowly reach ambient conditions (25° C.)
  5. stirringAfter 22 hours of stirring
  6. customto separate
  7. customThe aqueous layer was separated
  8. extractionextracted twice with 20 ml portions of ethyl ether
  9. concentrationconcentrated on a rotary evaporator
  10. customto remove the ether
  11. distillationdistilled

Quellen und Nachweise

ORD-Eintrag
ord-8fc3a731fdda41889dde40611fcea14d
Quelldatensatz
uspto-grants-1993_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US05274171

Notizen zur Reaktion

Auf dieser SeiteKomponentenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion