홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 4-(2-Chloro-4-trifluoromethylphenoxy)benzene

HRID 1577944
인쇄

반응식

HRID 1577944 반응식
[C:1]1([OH:7])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[OH-].[Na+].Cl[C:11]1[CH:16]=[CH:15][C:14]([C:17]([F:20])([F:19])[F:18])=[CH:13][C:12]=1[Cl:21].Cl>[Cu].O.C1(C)C=CC=CC=1.CS(C)=O>[Cl:21][C:12]1[CH:13]=[C:14]([C:17]([F:20])([F:19])[F:18])[CH:15]=[CH:16][C:11]=1[O:7][C:1]1[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 4

HCID 313Hydrochloric AcidHCID 996PhenolHCID 94813,4-Dichlorobenzotrifluoride2회HCID 14798Sodium Hydroxide

생성물 1

HCID 129181714-(2-Chloro-4-trifluoromethylphenoxy)benzene수율 98.5%

시약·촉매·용매 4

HCID 23978Copper
촉매
HCID 679Dimethyl Sulfoxide용매
HCID 962Water용매
HCID 1140Toluene용매

반응 조건

온도
155 °C

실험 절차

In this example 2143 g (22.77 mol) of phenol and 906 g (22.66 mol) of sodium hydroxide were mixed together in a stirred mixture of 5.5 liters of dimethyl sulfoxide and 5.5 liters of toluene at room temperature. The mixture was then heated at reflux for 54 hours. The water formed by the reaction was removed along with a substantial portion of the toluene and a small amount of the dimethyl sulfoxide (total volume collected 4910 ml of which 690 ml were water). The temperature of the remaining reaction mixture, now containing sodium phenolate, was permitted to drop to 155° C. and 44 g of powdered copper was added. 4730 g (22 mol) of 1,2-dichloro-4-trifluoromethylbenzene was then added dropwise while maintaining the reaction mixture at 153°-155° C. After addition of the 1,2-dichloro-4-trifluoromethylbenzene, the reaction mixture was maintained at 155° C. for about 30 minutes and then allowed to stand overnight (about 12 hours) at room temperature. The reaction mixture was poured onto cold 0.5% HCl. phase separated and extracted with methylene chloride. Combined organics were washed with 5% sodium hydroxide and with water, dried over magnesium sulfate and silica, and filtered. The filtrate was then stripped (evaporated) affording 5906 g of 4-(2-chloro-4-trifluoromethylphenoxy)benzene as a yellow oil.

후처리

  1. temperatureThe mixture was then heated
  2. temperatureat reflux for 54 hours
  3. customwas removed along with a substantial portion of the toluene
  4. customThe temperature of the remaining reaction mixture, now containing sodium phenolate
  5. customto drop to 155° C.
  6. temperaturewhile maintaining the reaction mixture at 153°-155° C
  7. custom(about 12 hours)
  8. customat room temperature
  9. customphase separated
  10. extractionextracted with methylene chloride
  11. washCombined organics were washed with 5% sodium hydroxide and with water
  12. dry with materialdried over magnesium sulfate and silica
  13. filtrationfiltered
  14. custom(evaporated)

출처 및 근거

ORD 기록
ord-024198ff59e847708e99be136f3bd477
출처 데이터셋
uspto-grants-1981_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04289909

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트