홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Water → 2,5-Diamino-4,6-dichloropyrimidine

HRID 2084579
인쇄

반응식

HRID 2084579 반응식
[ClH:1].[NH2:2][C:3]1[N:8]=[C:7](O)[C:6]([NH2:10])=[C:5](O)[N:4]=1.[Cl:12]CC(Cl)CCl.O=P(Cl)(Cl)Cl.[OH-].[Na+].O.CCCCCC>[Cl-].C[N+](C)(C)C.C(OCC)(=O)C.O1CCCC1>[NH2:2][C:3]1[N:8]=[C:7]([Cl:1])[C:6]([NH2:10])=[C:5]([Cl:12])[N:4]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

10

반응물 6

HCID 962WaterHCID 72851,2,3-TrichloropropaneHCID 8058HexaneHCID 14798Sodium HydroxideHCID 24813Phosphorus oxychlorideHCID 178479162HCID 178479162, 화합물

생성물 1

HCID 3010392,5-Diamino-4,6-dichloropyrimidine
수율 65%

시약·촉매·용매 3

HCID 6379Tetramethylammonium chloride촉매HCID 8028Tetrahydrofuran용매2회HCID 8857Ethyl Acetate용매2회

반응 조건

온도
115 °C

실험 절차

2,5-Diamino-4,6-dihydroxypyrimidine hydrochloride (0.14 mol, 25 g) was filled into a dry reactor. Dry 1,2,3-trichloropropane (51.96 ml) was then added and the whole was stirred. Subsequently, tetra-methylammonium chloride (0.29 mol, 31.25 g) and then POCl3 (0.54-0.81 mol, 124.9−83.28 g, 50.6-75.9 ml) were added. The reaction was heated at reflux temperature (about 115° C.) for 24 h. The reaction was then cooled to below 50° C., ice water (24.44 mol, 440.44 g) was added and the whole was kept below 55° C. Subsequently, the reaction was adjusted to a pH of between 6.5 and 7.0 using 50% strength NaOH (3.12 mol, 124.92 g, 163.3 ml) and the temperature was kept below 55° C. The reaction was stirred at between 50 and 60° C. for 30 min. Tetrahydrofuran (3.7 mol, 267.0 g, 300 ml) was then added. In order to remove undesired material, the whole mixture was filtered through Celite and the filter cake was then washed with ethyl acetate (20.5 mol, 1806.58 g, 2002.86 ml) for subsequent extraction. The organic phase (tetrahydrofuran and ethyl acetate) was washed 3 times with water (5.57 mol, 100.32 g, 100.32 l), dried over NaHCO3 and filtered. Ethyl acetate was removed by vacuum distillation. Hexane (0.77 mol, 66.14 g, 100.36 ml) was then added to the residual organic material, and the whole was cooled to below 10° C., filtered and then dried at 50° C. in vacuo. The title product (0.09 mol, 15.71 g) was obtained as a slightly brownish solid, corresponding to a yield of about 65% based on 2,5-diamino-4,6-dihydroxypyrimidine employed.

후처리

  1. temperatureThe reaction was heated
  2. temperatureThe reaction was then cooled to below 50° C.
  3. customwas kept below 55° C
  4. customwas kept below 55° C
  5. stirringThe reaction was stirred at between 50 and 60° C. for 30 min
  6. customIn order to remove undesired material
  7. filtrationthe whole mixture was filtered through Celite
  8. dry with materialdried over NaHCO3
  9. filtrationfiltered
  10. customEthyl acetate was removed by vacuum distillation
  11. temperaturethe whole was cooled to below 10° C.
  12. filtrationfiltered
  13. customdried at 50° C. in vacuo

출처 및 근거

ORD 기록
ord-9740d0888f804f079cbb427cdd97d183
출처 데이터셋
uspto-grants-2004_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06716981B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트