홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 4-(5-Chloro-2-hydroxyphenyl)-4-oxobutanoic acid

HRID 2397589
인쇄

반응식

HRID 2397589 반응식
[N+](C1C=CC=CC=1)([O-])=O.C(Cl)(Cl)C(Cl)Cl.[C:16]1(=[O:22])[O:21][C:19](=[O:20])[CH2:18][CH2:17]1.[Cl:23][C:24]1[CH:29]=[CH:28][C:27]([O:30]C)=[CH:26][CH:25]=1.[Al+3].[Cl-].[Cl-].[Cl-].Cl>>[Cl:23][C:24]1[CH:25]=[CH:26][C:27]([OH:30])=[C:28]([CH:29]=1)[C:19]([CH2:18][CH2:17][C:16]([OH:21])=[O:22])=[O:20]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 6

HCID 313Hydrochloric AcidHCID 65911,1,2,2-TetrachloroethaneHCID 7416NitrobenzeneHCID 7922Succinic anhydrideHCID 121674-ChloroanisoleHCID 6451240Aluminum(III) Chloride

생성물 1

HCID 4145242
4-(5-Chloro-2-hydroxyphenyl)-4-oxobutanoic acid

반응 조건

온도
5 °C

실험 절차

A dry flask was charged with 650 ml. each of nitrobenzene and sym-tetrachloroethane, 104 g. (1.04 moles) succinic anhydride and 130 g. (0.913 mole) p-chloroanisole. The mixture was stirred at 5° C and 276 g. (2.07 moles) of anhydrous AlCl3 was added portionwise over a 90 minute period such that the temperature did not exceed 10° C. The resulting mixture was stirred under nitrogen for 5 days at 7° C and then poured into a mixture of 1 kg. of ice and 176 ml. concentrated hydrochloric acid. The thus quenched mixture was steam distilled until all organic solvents were removed. The residual aqueous-oil combination was cooled to 20° C whereupon the oil phase crystallized. The aqueous supernate was then drawn off and one liter of methylene chloride was added to the remaining crystallized solid mass. The resulting slurry was warmed at 25° C with stirring, and then filtered, and the filtered-off solids washed with CH2Cl2. Upon drying of the washed solids, 84.4 g. of 3-(5-chloro-2-hydroxybenzoyl) propionic acid, m.p. 178°-182° C., was obtained.

후처리

  1. additionA dry flask was charged with 650 ml
  2. customdid not exceed 10° C
  3. stirringThe resulting mixture was stirred under nitrogen for 5 days at 7° C
  4. additionpoured into a mixture of 1 kg
  5. distillationdistilled until all organic solvents
  6. customwere removed
  7. temperatureThe residual aqueous-oil combination was cooled to 20° C whereupon the oil phase
  8. customcrystallized
  9. additionone liter of methylene chloride was added to the
  10. customremaining crystallized solid mass
  11. temperatureThe resulting slurry was warmed at 25° C
  12. stirringwith stirring
  13. filtrationfiltered
  14. washthe filtered-off solids washed with CH2Cl2
  15. customUpon drying of the washed solids, 84.4 g

출처 및 근거

ORD 기록
ord-4081c3aeea6643a6a7ebf927213e3f9e
출처 데이터셋
uspto-grants-1977_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04022791

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트