홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → HCID 178459369, 화합물

HRID 365164
인쇄

반응식

HRID 365164 반응식
[CH2:1]([OH:4])[C:2]#[CH:3].[H-].[Na+].[Na].[CH:8]([C:11]1([CH3:25])[N:15]2[C:16](=[O:23])[C:17]3[C:22]([C:14]2=[N:13][C:12]1=[O:24])=[CH:21][CH:20]=[CH:19][CH:18]=3)([CH3:10])[CH3:9].Cl>C(Cl)Cl>[CH:8]([C:11]1([CH3:25])[NH:15][C:14]([C:22]2[CH:21]=[CH:20][CH:19]=[CH:18][C:17]=2[C:16]([O:4][CH2:1][C:2]#[CH:3])=[O:23])=[N:13][C:12]1=[O:24])([CH3:10])[CH3:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 313Hydrochloric AcidHCID 7859Propargyl alcohol2회HCID 24758Sodium hydride2회HCID 27292473-isopropyl-3-methyl-3H-imidazo[2,1-a]isoindole-2,5-dioneHCID 5360545Sodium

생성물 1

HCID 178459369HCID 178459369, 화합물

시약·촉매·용매 1

HCID 6344Dichloromethane용매

반응 조건

온도
5 °C

실험 절차

To 12.5 ml of propargyl alcohol is added 0.1 g of a 50% suspension of sodium hydride in mineral oil. The addition is made under a blanket of nitrogen while the mixture is stirred and the temperature thereof maintained at from 20° C. to 25° C. by means of external cooling. The formation of the sodium salt of propargyl alcohol is complete in about 1 to 2 hours. To this solution is added 5.0 g of 3-isopropyl-3-methyl-5H-imidazo[2,1-a]isoindole2(3H), 5-dione and the mixture stirred at room temperature overnight under a blanket of nitrogen. Thin layer chromatography indicates incomplete reaction and an additional 50 mg of a 50% suspension of sodium hydride in oil is added to the reaction mixture. After stirring overnight, the mixture is cooled to 5° C. and 0.7 ml of 3N hydrochloric acid is added. The mixture is then diluted with methylene chloride, washed with water and the organic phase dried and concentrated in vacuo. The crystalline residue is transferred to a filter funnel with hexane and air dried to give 6.02 g of 2-propynyl o-(5-isopropyl-5-methyl-4-oxo-2-imidazolin-2-yl)benzoate, melting point 131°-144° C. Material from a similar reaction was recrystallized from acetone-hexane to give pure product melting point 145°-147° C.

후처리

  1. additionThe addition
  2. temperaturethe temperature thereof maintained at from 20° C. to 25° C. by means of external cooling
  3. stirringthe mixture stirred at room temperature overnight under a blanket of nitrogen
  4. customreaction
  5. stirringAfter stirring overnight
  6. washwashed with water
  7. customthe organic phase dried
  8. concentrationconcentrated in vacuo
  9. customThe crystalline residue is transferred to a filter funnel with hexane and air
  10. customdried

출처 및 근거

ORD 기록
ord-cf8e1e05980a4d158fa38d3cbc307a30
출처 데이터셋
uspto-grants-1986_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04608437

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트