홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → HCID 178459369, 화합물

HRID 848632
인쇄

반응식

HRID 848632 반응식
[CH2:1]([OH:4])[C:2]#[CH:3].[H-].[Na+].[Na].[CH:8]([C:11]1([CH3:25])[N:15]2[C:16](=[O:23])[C:17]3[C:22]([C:14]2=[N:13][C:12]1=[O:24])=[CH:21][CH:20]=[CH:19][CH:18]=3)([CH3:10])[CH3:9].Cl>C(Cl)Cl>[CH:8]([C:11]1([CH3:25])[NH:15][C:14]([C:22]2[CH:21]=[CH:20][CH:19]=[CH:18][C:17]=2[C:16]([O:4][CH2:1][C:2]#[CH:3])=[O:23])=[N:13][C:12]1=[O:24])([CH3:10])[CH3:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 313Hydrochloric AcidHCID 7859Propargyl alcohol2회HCID 24758Sodium hydride2회HCID 27292473-isopropyl-3-methyl-3H-imidazo[2,1-a]isoindole-2,5-dioneHCID 5360545Sodium

생성물 1

HCID 178459369HCID 178459369, 화합물

시약·촉매·용매 1

HCID 6344Dichloromethane용매

반응 조건

온도
5 °C

실험 절차

To 12.5 ml of propargyl alcohol is added 0.1 g of a 50% suspension of sodium hydride in mineral oil. The addition is made under a blanket of nitrogen while the mixture is stirred and the temperature thereof maintained at from 20° C. to 25° C. by means of external cooling. The formation of the sodium salt of propargyl alcohol is complete in about 1 to 2 hours. To this solution is added 5.0 g of 3-isopropyl-3-methyl-5H-imidazo[2,1-a]isoindole-2(3H),5-dione and the mixture stirred at room temperature overnight under a blanket of nitrogen. Thin layer chromatography indicates incomplete reaction and an additional 50 mg of a 50% suspension of sodium hydride in oil is added to the reaction mixture. After stirring overnight, the mixture is cooled to 5° C. and 0.7 ml of 3 N hydrochloric acid is added. The mixture is then diluted with methylene chloride, washed with water and the organic phase dried and concentrated in vacuo. The crystalline residue is transferred to a filter funnel with hexane and air dried to give 6.02 g of 2-propynyl o-(5-isopropyl-5-methyl-4-oxo-2-imidazolin-2-yl)benzoate, melting point 131°-144° C. Material from a similar reaction was recrystallized from acetone-hexane to give pure product melting point 145°-147° C.

후처리

  1. additionThe addition
  2. temperaturethe temperature thereof maintained at from 20° C. to 25° C. by means of external cooling
  3. stirringthe mixture stirred at room temperature overnight under a blanket of nitrogen
  4. customreaction
  5. stirringAfter stirring overnight
  6. washwashed with water
  7. customthe organic phase dried
  8. concentrationconcentrated in vacuo
  9. customThe crystalline residue is transferred to a filter funnel with hexane and air
  10. customdried

출처 및 근거

ORD 기록
ord-f39fc658bd4c45db9bc4e94a5cfc5bf4
출처 데이터셋
uspto-grants-1981_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04297128

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트