HomeMCPWorkbenchSkills
HomeWorkbenchNotificationsMe
llms.txt · MCP GuidePrivacy Policy · Terms of Service · Supportv1.8.3
  1. Home
  2. /Reaction

Hydrochloric Acid → 4-(3-Butenyl)benzonitrile

HRID 898765
Print

Reaction equation

HRID 898765 reaction equation
[Mg].Br[CH2:3][CH2:4][CH:5]=[CH2:6].Br[C:8]1[CH:15]=[CH:14][C:11]([C:12]#[N:13])=[CH:10][CH:9]=1.Cl>C1COCC1.[Zn+2].[Br-].[Br-].C1C=CC([P]([Pd]([P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)([P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)[P](C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)(C2C=CC=CC=2)C2C=CC=CC=2)=CC=1.C1(C)C=CC=CC=1>[CH2:3]([C:8]1[CH:15]=[CH:14][C:11]([C:12]#[N:13])=[CH:10][CH:9]=1)[CH2:4][CH:5]=[CH2:6]
ParticipantsConditionsProcedureWorkupSources & evidenceReaction notes

Participants

9

Reactant 4

HCID 313Hydrochloric AcidHCID 12162Benzonitrile, 4-bromo-HCID 21241Homoallyl bromideHCID 5462224Magnesium

Product 1

HCID 117448814-(3-Butenyl)benzonitrileYield 80.7%

Reagents, catalysts & solvents 4

HCID 10421208
Zinc bromide
Catalyst
2×
HCID 178418397HCID 178418397, compoundCatalyst
HCID 1140TolueneSolvent
HCID 8028TetrahydrofuranSolvent3×

Conditions

Temperature
50 °C

Procedure

Magnesium (4.2 g, 173 mmol) was activated by washing with dilute HCl, water and acetone and was then dried in vacuo. ZnBr2 (37 g, 165 mmol) was sublimed under reduced pressure (approx. 5-20 mmHg) by gentle heating in a glovebox. The glovebox was used as it was extremely humid in the lab. Mg and ZnBr2 were mixed in a dry 3-necked flask under N2 and dry THF (30 mL) was added. 4-Bromo-1-butene (25.1 g, 186 mmol) dissolved in dry THF (175 mL) was added dropwise to the Mg/ZnBr2 slurry and, during the addition, the reaction mixture turned greyish and then black. Some heat was also evolved (>40° C.). After complete addition, the mixture was heated to 50° C. overnight. 4-Bromobenzonitrile (30.5 g, 167 mmol) was co-evaporated with toluene twice and was then dissolved in dry THF (250 ml) together with Pd(PPh3)4 (5 g, 4.3 mmol, 2.5 mole). The slurry was added to the Grignard reagent and the reaction mixture was stirred at room temperature overnight. HCl (500 mL, 3 M) was added dropwise to the reaction mixture, and the resulting solution was extracted with ether (1000+3×500 mL), the combined ether solutions were washed with NaHCO3 (satd. 3×250 mL), dried, filtered and evaporated. The crude product (29.7 g) was subjected to Dry-Flash chromatography (diameter 12 cm, height 5 cm, heptane:EtOAc (99:1 to 90:10)) to give 21.2 g of the sub-title compound contaminated with 4-bromobenzonitrile (about 20%). This material was used in the next step.

Workup

  1. washby washing with dilute HCl, water and acetone
  2. customwas then dried in vacuo
  3. temperatureby gentle heating in a glovebox
  4. custom(>40° C.)
  5. additionAfter complete addition
  6. extractionthe resulting solution was extracted with ether (1000+3×500 mL)
  7. washthe combined ether solutions were washed with NaHCO3 (satd. 3×250 mL)
  8. customdried
  9. filtrationfiltered
  10. customevaporated

Sources & evidence

ORD record
ord-4babe20defe745ea87cd6d32ac284a08
Source dataset
uspto-grants-2008_04
DOI
10.6084/m9.figshare.5104873.v1
Patent number
US07351821B2

Reaction notes

On this pageParticipantsConditionsProcedureWorkupSources & evidenceReaction notes